Description Details
Drifting Instability in Two Phase Heat Transfer Systems, British Chemical Engineering, Jan 1965, p 6

Description Details
Fourier, Mechanical Engineering, August, 2005, pp 30-31 (a condensation of ?Fourier?the Father of Modern Engineering?)

Description Details
Why the Fluid Friction Factor Should Be Abandoned, and the Moody Chart Transformed, The Open Mechanical Engineering Journal, 2009, 3, 43-48

Description Details
The first book that addressed the full scope of the new engineering. For more information visit http://thenewengineering.com

Description Details
Software Quality Assurance is a specialized activity and it contributes in building capable processes in organization. This book details the different knowledge areas and provides practical insight which is required for software quality analyst to quickly grasp and start being productive within days, and contributes to build such capable processes. This book details the basics of quality assurance, relevant techniques and methods used in quality assurance. What is in there? • A quick description of various knowledge areas in software quality assurance • Frequently used tools and techniques in Software quality assurance • Sample cases to understand the concepts Why this book? • A simple ready recknor for SQA • Mix of pragmatic and theoretical elaborations • Industry specific and current needs of Industry is taken care • Short book for quick read Who should read? • People who are interested in making a career in software quality assurance • Who are interested in understanding Quality assurance • Who are leading an organization and wants to set up the Quality assurance function ...

Excerpt Details
Audit Expectations: An audit is expected to check, does the Quality System meet the requirements of the relevant Quality System Standard/model or Contract? Does the organization do what the Quality System specifies? Is the Quality System, as implemented, effective in ensuring maintenance and improvement of the quality of products and services? Audit is not an alternative to an inspection operation and cannot serve as a crutch to an ineffective inspection or quality system Types of Audit: • First Party Audit (Internal Audits) • Second Party Audit (Customer Audits) • Third Party Audit (Audit Agencies) Horizontal and Vertical Audits: • Horizontal Audit - Assess same aspect in all projects. • Vertical Audit - Assess all aspects in one project • forward tracking • backward tracking • Hybrid Audits - Mixing Horizontal and Vertical Audits Audit Team: One or more auditors conducting an audit, supported if needed by Technical Experts. The auditors are lead by Lead Auditor. One or more auditees represent the function or the organization. Lead Auditor Responsibilities: (Second party and Third party audits) • Negotiate scope ...

Table of Contents Details
Quality Fundamentals Quality Assurance Functions Lifecycle Models Project Management Configuration Management Software Estimation Risk and Issue Management Tailoring and Waivering Software Engineering - Development Service Management Reviews Metrics Core SQA Activities Quality Audits Quality Control Tools and Basic Statistics Standards (ISO 9001, 20000, 27001) and Models (CMMI, PCMM) Agile Scrum Earned Value Analysis Reference Sites ...

Description Details
Technology Horizons is our vision for key Air Force science and technology investments over the next decade that will provide us with truly game-changing capabilities to meet our strategic and joint force responsibilities. The coming decades hold high promise for amazing new capabilities across the air, space, and cyber domains. Yet the Air Force and our nation will also be confronted with substantial strategic, technology, and budget challenges. Our greatest advances will come with a focused investment of resources in the most promising technologies. The vision in Technology Horizons provides the shared awareness of the challenges and opportunities that will enable us to achieve this focus....

Table of Contents Details
LIST OF ILLUSTRATIONS . . . . . vii FOREWORD BY THE SECRETARY OF THE AIR FORCE AND CHIEF OF STAFF OF THE AIR FORCE . . . . ix PREFACE BY THE CHIEF SCIENTIST OF THE AIR FORCE . . . . xi ACKNOWLEDGMENTS . . . . xv EXECUTIVE SUMMARY . . . . . xvii 1 INTRODUCTION . . . . 1 A Vision for Air Force Science and Technology 2010–30 . . . . 1 Lessons Learned from Prior Air Force Science and Technology Visions . . . . 5 Organization and Conduct of Technology Horizons . . . . . 8 Organization of Results from Technology Horizons . . . . . 14 Caveats . . . . 16 2 STRATEGIC CONTEXT FOR AIR FORCE S&T 2010–30 . . . . . 19 Relation to National Security Objectives . . . . . 21 Technology-Derived Challenges to Air Force Capabilities . . . . . 22 Strategic Implications of S&T Globalization . . . . 38 Federal Budget Implications for Air Force S&T Strategy . . . . . 41 3 ENDURING REALITIES FOR THE AIR FORCE 2010–30 . . . . . 43 Ensuring Interoperability with Legacy Systems . . . . 43 Sustainment Costs for Legacy Systems . . . . . 43 Importance of Low-Observable Systems . . . . 44 Energy Costs and Availability . . . . . 44 Growing Role ...

Description Details
Information technology (IT) and its gadgets provide no allure. They are neither a marvel nor a toy but exist solely to help get something done. This impassive attitude allows me to avoid capability hype with what IT can do and ask “So, what does IT really do for me?” This attitude is partly due to my mechanical engineering background and to the practical systems engineering philosophies instilled in me by my father. I have successfully exploited IT capabilities to perform engine cold-start analyses, design coal crushers, train missile crews, simulate radar satellite constellations, track satellite parts and construction practices, and create intelligence fusion software. But with each success made possible through IT came scores of frustrations that sprang from IT solutions. While writing this paper I came to realize that this frustration comes from man having to manipulate IT rather than applying it as an extension of oneself. This fundamental disconnect between capability and utility comes from disconnects between developers and users, institutional restrictions on individual innovation, and general ignorance of available tools, p...

Description Details
"From my experience in the aviation field, I find that this unique aviation and space history book provides a very realistic view on the use of technology in the aviation and space business as it was conquered during the past half century."...

Table of Contents Details
1 Aeronautical Engineering . . . . . . . . . . . . . 1 2 Pilots and Education . . . . . . . . . . . . . . . .15 3 Aircraft Procurement . . . . . . . . . . . . . . . .29 4 Aeronautics . . . . . . . . . . . . . . . . . . . . . .59 5 Missiles . . . . . . . . . . . . . . . . . . . . . . . . 81 6 Computer Programming . . . . . . . . . . . .113 7 Spacefarers . . . . . . . . . . . . . . . . . . . . .121 8 Secret Missiles and Tactics . . . . . . . . . . 161 9 Space Projects . . . . . . . . . . . . . . . . . . .173 10 Pilots and Airplanes . . . . . . . . . . . . . . 183 11 Cyclogiro Aircraft . . . . . . . . . . . . . . . . 201 12 Giromill Wind Power . . . . . . . . . . . . . . 211 13 Aquagiro Water Power . . . . . . . . . . . . .233...

Description Details
In this book the author teaches how to use of SolidWorks as a tool for developing and presenting engineering ideas and concepts. In addition to teaching the basics of SolidWorks, he shares his experience related to how these tools are used in an engineering organization. Many introductory CAD tutorials focus only on the software and train students to be skilled CAD operators. This book also places equal emphasis on creating engineering drawings that comply with accepted design standards. Engineering drawings are the most important means of communication between the design and manufacturing functions. They are also necessary for the maintenance and repair of consumer and industrial product as varied as automobiles, airplanes, earth moving equipment and cruise ships. Lastly, engineering drawings are legal documents and commonly used to determine and apportion fault in product liability lawsuits. Every engineering and manufacturing professional must be proficient at creating, understanding and using engineering drawings. The second edition updates the book to the latest version of SolidWorks (2014)....

Excerpt Details
The reason for writing another “Introduction to SolidWorks” book is to emphasize the role and importance of computer aided design (CAD) and engineering drawings in communicating design ideas. The old adage “a picture is worth a thousand words” is true in mechanical engineering design. Sometimes it is impossible to describe a complex design in words and we must use engineering drawings. ...

Table of Contents Details
The book is divided into the following five sections: 1. Introducing and Customizing SolidWorks 2. Modeling Simple Parts 3. Modeling Complex Parts 4. Modeling Assemblies 5. Creating Engineering Drawings...

Description Details
In this book the author teaches how to use of SolidWorks as a tool for developing and presenting engineering ideas and concepts. In addition to teaching the basics of SolidWorks, he shares his experience related to how these tools are used in an engineering organization. Many introductory CAD tutorials focus only on the software and train students to be skilled CAD operators. This book also places equal emphasis on creating engineering drawings that comply with accepted design standards. Engineering drawings are the most important means of communication between the design and manufacturing functions. They are also necessary for the maintenance and repair of consumer and industrial product as varied as automobiles, airplanes, earth moving equipment and cruise ships. Lastly, engineering drawings are legal documents and commonly used to determine and apportion fault in product liability lawsuits. Every engineering and manufacturing professional must be proficient at creating, understanding and using engineering drawings. ...

Excerpt Details
The reason for writing another “Introduction to SolidWorks” book is to emphasize the role and importance of computer aided design (CAD) and engineering drawings in communicating design ideas. The old adage “a picture is worth a thousand words” is true in mechanical engineering design. Sometimes it is impossible to describe a complex design in words and we must use engineering drawings....

Table of Contents Details
The book is divided into the following five sections: 1. Introducing and Customizing SolidWorks 2. Modeling Simple Parts 3. Modeling Complex Parts 4. Modeling Assemblies 5. Creating Engineering Drawings ...

Description Details
Explains the various techniques of PPM development, simulation and optimization. All the explanations are given with IT industry and usage of alternate techniques to build PPM to suit even smaller organizations. Application of Statistical, Probablistic and Simulation models are elaborated. ...

Table of Contents Details
Modelling in CMMI What are the Characteristics of a Good PPM? The role of Simulation & Optimization Types of Models - Definitions Tree of Models Process of Modelling Modelling under our purview Regression Regression - Steps Regression - Example Validating model accuracy Variants in Regression Tools for Regression Bayesian Belief Networks Bayesian Belief Networks- Steps Bayesian – Sample Bayesian Tools Neural Network Neural Networks - Steps Neural Networks - Sample Neural Network Tools Reliability Modelling Reliability Modelling- Steps Reliability Modelling- Sample Reliability Modelling- Tools Process Modelling (Queuing System) Process Modelling -Steps Process Modelling -Validation Process Modelling -Tools Fuzzy Logic Fuzzy Logic- Sample Fuzzy Logic – Sample Monte Carlo Simulation Monte Carlo Simulation- STEPS Monte Carlo Simulation- SAMPLE Monte Carlo Tools Model Selection – Thought Key Characteristics to determine model References Thanks to Team Screenshots Contribution From Connect To Us ...

Description Details
As the nation’s campaign against terrorism proceeds, our military services continue to embrace high technology, advanced sensors, and precision weaponry for use on current battlefields. The term cyber warrior has truly stepped from the pages of science fiction into reality. Equipment and technology do not constitute the only developments, however, because today’s cyber warriors emerge from a society and military culture very different in many respects from those of past generations of warriors....

Table of Contents Details
1 EMPLOYEE WARRIORS . . . . . . . . . . . . . . .1 Values Crisis? . . . . . . . . . . . . . . . . . . . . . . 2 Harnessing a Different Military . . . . . . . . . . 3 Cultures in Conflict . . . . . . . . . . . . . . . . . . .4 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 2 TRADITIONAL MILITARY CULTURE . . . . . . .7 Professionalism and Homogeneity . . . . . . . .7 Fraternity . . . . . . . . . . . . . . . . . . . . . . . . . 9 Institutional Values . . . . . . . . . . . . . . . . . 10 Value Studies of the Military . . . . . . . . . . . 10 Traditional Culture . . . . . . . . . . . . . . . . . . 11 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3 THE NEW BUSINESS-SCIENTIFIC CULTURE . . . . . . . . . . . . . . . . . . . . . . . . .13 New World Order . . . . . . . . . . . . . . . . . . . 13 Volunteer Fighting Force . . . . . . . . . . . . . .14 Occupational Identity . . . . . . . . . . . . . . . .15 Technology and the Great Engineering Venture . . . . . . . . . . . . . . . . . . . . . . . . .16 Civilian Military . . . . . . . . . . . . . . . . . . . . .16 Force of Specialists . . . . . ...

Description Details
The Book details on how to approach CMMI Implementation in an organization. It details out the various phases involved in CMMI Implementation and how to plan and execute them. It details on various aspects which we tend to overlook in CMMI Implementation. Who Should Read? • Organization looking forward to implement CMMI • Top Management person, trying to understand how to go about • SEPG, Program manager and Process Quality members • Anyone who is interested in understanding the Implementation of CMMI Why to Read? • To get complete End to End understanding on CMMI Implementation Lifecycle • Plan your budget, effort and resources for the program • Set your expectations clear on CMMI Implementation • Be aware of the different aspects in Implementation How it’s different: • Written from practitioners’ point of view • Communicates the reality in practical implementation Word of Caution: • The book contains only samples and typical examples and they are not comprehensive and to be verified and validated on a particular context for applicability ...

Excerpt Details
This CMMI Implementation Guide is a reference book for anyone interested in implementing CMMI in their organization. The purpose of this book is, to provide insight in to CMMI Implementation phases and best practices to be followed in this journey. Most of us agree, that CMMI is more a De facto model that IT Industry follows and other industries also has shown lot of interest in adopting this model. The day to day popularity and its adoption rate is on the surge for CMMI. In this scenario, this book will help the new organizations and implementers, on how to approach CMMI Implementation practically in their organization. This book is not a replacement to the Model or to the resources which CMMI Institute Publishes. This is only an additional resource which user can benefit from. CMMI Institute holds the complete authority and rights to CMMI model and all the components within the framework. This book is prepared based on the experience of a practitioner on implementing the model in various organizations. The Author has worked in multiple roles in CMMI Implementation and has global exposure in implementing the model. We reiterate ...

Table of Contents Details
Contents Introduction to CMMI Initiating CMMI Implementation Planning CMMI Implementation Executing CMMI Implementation Appraising CMMI Implementation Sustaining CMMI Implementation CMMI High Maturity Implementation Miscellaneous References ...

Description Details
This book has six chapters. First chapter gives a brief description of biotechnology. Second chapter deals will proper proportion of mix of raw materials in cement industries to minimize pollution using fuzzy control theory. Chapter three gives the method of determination of temperature set point for crude oil in oil refineries. Chapter four studies the flow rates in chemical industries using fuzzy neutral networks. Chapter five gives the method of minimization of waste gas flow in chemical industries using fuzzy linear programming. The final chapter suggests when in these studies indeterminancy is an attribute or concept involved, the notion of neutrosophic methods can be adopted. The authors feel that the reader should be well versed with fuzzy models like neural networks, fuzzy relational equations, fuzzy control theory, fuzzy linear programming and neutrosophic fuzzy models like NRE together with a knowledge of the technical functioning of chemical industries....

Excerpt Details
2.4 Finding the MIX of raw materials in proper proportion and minimize the waste dust using fuzzy neural network. The study of proper proportions of material mix during the clinkerization process is very difficult due to inconsistency in the chemical and mineralogical composition and the variation of these characteristic affects kiln operation, fuel consumption, clinker quality and above all the amount of CKD vent into the atmosphere. Further the raw mix should maintain a fixed range for a specific quality of cement. The problem of satisfying this range involves lot of randomness and uncertainty, which in turn speaks about the desired quality of the clinker. ...

Table of Contents Details
Preface 5 Chapter One INTRODUCTION 7 Chapter Two BIOTECHNOLOGY IN CHEMICAL INDUSTIRES 11 2.1 Description of waste CKD in cement kiln 13 2.2 Monitoring and control of the system using FCT and improvement of burning zone and combustion 16 2.3 Determination of gas volume setpoint and temperature set point for CKD processing 26 2.4 Finding the MIX of raw materials in proper proportion and minimize the waste dust using fuzzy neural network 35 Chapter Three DETERMINATION OF TEMPERATURE SET POINTS FOR CRUDE OIL 47 3.1 Introduction 47 3.2 Description of Crude Oil Refineries 48 3.3 Determination of Temperature Set-Point of Kerosene Resulting in Better Distillation Using Fuzzy Control Theory 52 3.4 Determination of Temperature Set Point of Naphtha Resulting in Better Distillation using Fuzzy Control Theory 61 3.5 Determination of Temperature Set-Point of Gasoil Resulting in Better Distillation using Fuzzy Control Theory 69 3.6 Conclusions 78 Chapter Four STUDY OF FLOW RATES IN CHEMICAL PLANTS 79 4.1 Use of FRE in Chemical Engineering 79 4.2 Fuzzy neural networks to estimate velocity of flow distribution in a pipe networ...

Description Details
Total consumption of milk in developing regions is projected to increase from 164 million metric tonnes in 1993 to 391 million metric tons by the year 2020 – a 138 percent increase! The expected increase in per capita consumption is from 38 to 62 kg/person. The triple effects of population increase, income growth and urbanisation will fuel this tremendous growth in demand. Milk provides quality protein and essential micronutrients needed for nutrient balance in marginal diets based on staple grain and root crops. The production of more milk in developing countries will help meet the needs of urban families at prices they can afford. With affordable prices, poor families, especially children, are more likely to consume the quality protein and essential micronutrients they need for healthy physical and mental development. Increasing dairy production is a major challenge for those engaged in international livestock development. Moreover, there are environmental concerns about livestock production in fragile landscapes, so increasing milk supply should be done in an environmentally sustainable manner. Research can help meet this c...

Table of Contents Details
Table of Contents About the Authors Acknowledgements Foreward Chapter 1: The dairy industry in a changing world H. Schelhaas Introduction Four specific features of the dairy industry Milk production The processing industry in Western countries Dairy policy Consumption of dairy products in Western countries The international dairy markets Conclusions Suggested reading Chapter 2: Dairy production systems in the tropics P. N. de Leeuw, A. Omore, S. Staal and W. Thorpe Global overview of tropical dairy production Sub-Saharan Africa Asia Central and South America Dairy production systems in sub-Saharan Africa Dairy production systems in Asia Dairy production systems in Latin America Dual-purpose systems Intensive milk production Conclusions References Chapter 3: Socio-economic aspects of smallholder dairy farmers A. J. De Boer Introduction Smallholder dairy farming systems Types of systems Post-milking considerations Technological change and technology transfer for smallholder dairying Background Methods On-farm trials Change, dynamics and opportunities Impact of economic liberalisa...

Description Details
Nivelul Aplicaţie, Interfaţa de Programare a Aplicaţiei (IPA), Servicii de Prezentare, Nivelul Transport, Nivelul Reţea, Nivelul Legatură de Date, Nivelul Fizic, Securitatea, Managementul Reţelelor, Garanţii în Sistemul Calităţii, Perspective Mai multe formate de carte electronică: http://www.trybuyshop.com/product/retele-de-calculatoare-de-nicolae-sfetcu/...

Excerpt Details
Reţele, protocoale şi servicii asigurate prin reţelele de calculatoare.

Description Details
An Improved Form for Natural Convection Heat Transfer Correlations, Strojniski vestnik?Journal of Mechanical Engineering 51(2005)7-8, pp 374-378

Description Details
Here are some of my notes about reverse engineering in English language for those beginners who would like to learn to understand x86 (which accounts for almost all executable so ware in the world) and ARM code created by C/C++ compilers. There are several popular meanings of the term “reverse engineering”: 1) reverse engineering of so ware: researching of compiled programs; 2) 3D model scanning and reworking in order to make a copy of it; 3) recreating DBMS structure. These notes are related to the first meaning. ...

Description Details
In this series of books we look the Vintage Cranes that Coles built over the years from 1879 to 1944. We see how the cranes developed through the years and how changes in the needs of users shaped this development....

Excerpt Details
The older cranes, some of which were probably only prototypes, left little information behind other than grainy photographs. What we do have is a series of photographs in the history section of the 1958s Coles sales catalogue, this gives an image and date of twelve keynote units. Some of these units like the steam rail cranes were built or maintained throughout this period. Here based on this list, I well try to give as much as can be found about these early cranes....

Description Details
Professor Florentin Smrandache is invited to spend a period of three months time at the Research Institute of Extension Engineering at Guangdong University of Technology in China in order to conduct research on extenics....

Excerpt Details
Cu moralul extrem de ridicat, alerg pe autostrada I-40 din Gallup spre aeroportul din Albuquerque. Urlă muzica. Ferestrele deschise. Muzică populară românească, din Banat şi Oltenia, la casetă. Am înregistraţi şi pe cântăreţii mei din Bălceşti: Vasile Oprea (Vasilică a lu’ Tirina, vecinul meu), Mărin Covrig (coleg de şcoală primară şi generală), Gheorghe Lupu (mai mare cu doi ani ca mine, stătea peste drum de casa mea)....

Table of Contents Details
Application / 3 Invitation / 8 Extensica. Fotojurnal instantaneu din Canton / 9 Certificate / 170 Letter / 171

Description Details
Urbanization expanded tremendously, thus brunging about grave and extremely adverse changes to the hydrology, as well as to the water quality and the ecological balance of urbanized areas. In order to deal with flood waters in urban areas, mostly drainage systems were developed. However, the expansion of networks that collect water and transport it to the sea is a classic approach of dealing with rainwater runoff that has grave quantity and environmental consequences and is thus nowadays hydraulically inefficient, technically doubtful, environmentally aggravating and management erroneous. The sustainable approach to the problem is a practice trying to “imitate” nature. This means, among others, that rainwater management is regarded not just as a technical work, but primarily as planning of the area emphasizing on functionality, on making the area more attractive and on conserving biodiversity. In order to manage urban runofff in a aeiphorian manner, numerous structural, as well as regulating techniques, regulations and administrative measures have been developed, all aiming in minimizing urbanization consequences by water saving, ...

Description Details
Chapter 1 first introduces the interval neutrosophic sets which is an instance of neutrosophic sets. In this chapter, the definition of interval neutrosophic sets and set-theoretic operators are given and various properties of interval neutrosophic set are proved. Chapter 2 defines the interval neutrosophic logic based on interval neutrosophic sets including the syntax and semantics of first order interval neutrosophic propositional logic and first order interval neutrosophic predicate logic. The interval neutrosophic logic can reason and model fuzzy, incomplete and inconsistent information. In this chapter, we also design an interval neutrosophic inference system based on first order interval neutrosophic predicate logic. The interval neutrosophic inference system can be applied to decision making. Chapter 3 gives one application of interval neutrosophic sets and logic in the field of relational databases. Neutrosophic data model is the generalization of fuzzy data model and paraconsistent data model. Here, we generalize various set-theoretic and relation-theoretic operations of fuzzy data model to neutrosophic data model. Chapter ...

Excerpt Details
The neutrosophic set generalizes the above mentioned sets from philosophical point of view. From scientific or engineering point of view, the neutrosophic set and set-theoretic operators need to be specified. Otherwise, it will be difficult to apply in the real applications. In this chapter, we de_ne the set theoretic operators on an instance of neutrosophic set called Interval Neutrosophic Set (INS). We call it as “interval" because it is subclass of neutrosophic set, that is we only consider the subunitary interval of [0; 1]....

Table of Contents Details
Preface iii 1 Interval Neutrosophic Sets 1 1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Neutrosophic Set . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 Interval Neutrosophic Set . . . . . . . . . . . . . . . . . . . . . 6 1.4 Properties of Set-theoretic Operators . . . . . . . . . . . . . . . . . . 14 1.5 Convexity of Interval Neutrosophic Set . . . . . . . . . . . . . . . . . . 15 1.6 Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . 16 1.7 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2 Interval Neutrosophic Logic 21 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2.2 Interval Neutrosophic Propositional Calculus . . . . . . . . . . . . . . . 23 2.2.1 Syntax of Interval Neutrosophic Propositional Calculus . . . . . . . . . 23 2.2.2 Semantics of Interval Neutrosophic Propositional Calculus . . . . . . . . . 24 2.2.3 Proof Theory of Interval Neutrosophic Propositional Calculus . . . . . . . . 25 2.3 Interval Neutrosophic Predicate Calculus . . . . . . . . . . . . . . . . 27 2.3.1 Syntax of Interval Neutrosophic Predicate Cal...

Description Details
A New and Simple Concept for the Analysis of Nonlinear Heat Transfer Phenomena Such as Boiling, British Chemical Engineering, Dec 1965, pp 840-845

Description Details
In the second book of this series we pick up the story in the 1960s twenty years before the 100 yrars book was produced. We do this as the first book missed out a vital section in relation to the merger of Coles with Priestman Brothers. This merger began to show cracks in the industry and in management thinking at the time. This book has the advantage of hindsight but hopefully gets closer to the truth of what happened to the company. In such a large company there are many stories here is the basic story of what happened....

Excerpt Details
By the late 1960s Coles, which was at this time part of the company Steels Engineering Products Ltd, had three factories in the United Kingdom producing cranes. Sunderland. - This the “Crown Works” was the main factory where there was a range of cranes being produced, among them the Aeneas, Proteus, Argus, Vigorous, Illustrious, Centurion, Valiant, Ranger, Liea, Endurance, Doninant and Conqueror. Many of these were available in different option as mobile, lorry mounted, rail, semi and full tower units. Also the newly developed Hydra hydraulic cranes were beginning to make an impact and production increased. Glzenbuty. - This was the old factory of F. Taylor & Sons which was ending its lines of Jumbo and Jib carrier cranes Grantham. - This was where R H Neal Ltd had been in business since 1939, although incorporated into Coles they were still making a range of their own diesel mechanical cranes and a hydraulic Hymax hybrid. A new hydraulic introduced based on the Hydra truck was a rough terrain unit called the Husky, these would eventually become the sole production of this factory as the range extended and became a massive...

Description Details
In The 2nd Conference on Combinatorics and Graph Theory of China (Aug. 16-19, 2006, Tianjing), I formally presented a combinatorial conjecture on mathematical sciences (abbreviated to CC Conjecture), i.e., a mathematical science can be reconstructed from or made by combinatorialization, implicated in the foreword of Chapter 5 of my book Automorphism groups of Maps, Surfaces and Smarandache Geometries (USA, 2005). This conjecture is essentially a philosophic notion for developing mathematical sciences of 21st century, which means that we can combine different fields into a union one and then determines its behavior quantitatively. It is this notion that urges me to research mathematics and physics by combinatorics, i.e., mathematical combinatorics beginning in 2004 when I was a post-doctor of Chinese Academy of Mathematics and System Science. It finally brought about me one self-contained book, the first edition of this book, published by InfoQuest Publisher in 2009. This edition is a revisited edition, also includes the development of a few topics discussed in the first edition....

Excerpt Details
1.5 ENUMERATION TECHNIQUES 1.5.1 Enumeration Principle. The enumeration problem on a finite set is to count and find closed formula for elements in this set. A fundamental principle for solving this problem in general is on account of the enumeration principle: For finite sets X and Y , the equality |X| = |Y | holds if and only if there is a bijection f : X → Y . Certainly, if the set Y can be easily countable, then we can find a closed formula for elements in X....

Table of Contents Details
Contents Preface to the Second Edition . . . . . . . . . . . . . . . . . . . i Chapter 1. Combinatorial Principle with Graphs . . . . . . . . . . 1 1.1 Multi-sets with operations. . . . . . . . . . . . . . . . . . . . .2 1.1.1 Set . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1.2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1.3 Boolean algebra . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1.4 Multi-Set . . . . . . . . . . . . . . . . . . . . . . . . . .8 1.2 Multi-posets . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1.2.1 Partially ordered set . . . . . . . . . . . . . . . . . . . . .11 1.2.2 Multi-Poset . . . . . . . . . . . . . . . . . . . . . . 13 1.3 Countable sets . . . . . . . . . . . . . . . . . . . . . . . . 15 1.3.1 Mapping . . . . . . . . . . . . . . . . . . . . . . . . . 15 1.3.2 Countable set . . . . . . . . . . . . . . . . . . . . 16 1.4 Graphs . . . . . . . . . . . . . . . . . . . . . . . . 18 1.4.1 Graph. . . . . . . . . . . . . . . . . . . . . . . . . . . .18 1.4.2 Subgraph . . . . . . . . . . . . . . . . . . . . . . . . 21 1.4.3 Labeled graph. . . . . . ...

Description Details
The antiwar of our entire nation is defined as being the army-impeded forces, skirmishing shoulder to shoulder with the civilian population, with the purpose of defeating all non-aggressors, for securing our country’s slavery and dependency. The defeat in this battle is assured through a moral inferiority of our population - the right cause of this antiwar -, the lack of heroism of our state’s citizens, by applying an adequate blundering, using our geographical disadvantages, and the international public humiliation. ...

Excerpt Details
The battle and its non-goal. The battle is an ensemble of skirmishes of the subunits and units, which take place in a disorganized manner using armament and fighting techniques, for the expressed desire to enforce the enemy. The battle cannot take place on the ground, in the air, or on the water, in an open paradoxist cooperation with all-military denominations, and using their armament’s procedures with the goal of empowering the non-aggressor enemy. The battle is not the only way for obtaining the miscarriage. The battle’s goal is not the destruction or the capture of enemy’s groups, or the capture and holding on of critical portions of terrain. While in anti-defense, the defeat with fewer forces of the enemy’s superior forces would be done with our old-fashioned technique: ...

Table of Contents Details
Instruction Notebooks...............................3 Table of Contents .................................4 1 The Non-Tactical Instruction...........................10 Non-Assignment 1. ...............................10 The battle and its non-goal. ...........................12 The principles of non-organizing the battle’s actions. .................13 Non-Assignment 2...............................13 The disorganization principle of the subunits of unpatriotic guards. ............15 The subunits of the other branches of the military, their non-role, and their non-missions. ....15 The non-role and non-missions unsustainable by the other branches of the military. ......16 Not understanding the modern military ......................17 General principles disregarding the non-actions conducted by the subunits of a non-modern military in the inoffensive battles............................18 The anti-defense forms............................20 The non-roles and the non-missions of the fight units. .................20 The non-insurance for battle...........................20 The content of the battle’s non-insurance, its goal...