World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0037560200
Reproduction Date:

Title: Whipstaff  
Author: World Heritage Encyclopedia
Language: English
Subject: Mayflower, Control devices, Hawsehole, Chains (nautical), Gangway (nautical)
Publisher: World Heritage Encyclopedia


A whipstaff, sometimes called a whip or kolder-stok, is a device used in 16th- and 17th-century Europe to control the movement of a large sailing ship. Its development preceded the invention of the more-complex ship's wheel and followed the simple use of a tiller to control the steering of a ship underway.[1]

Before the 16th century most sailing vessels were sufficiently small that they could be steered by a single individual working the handle of the tiller which was directly connected to the rudder stock and therefore the rudder. However, as ships became taller and broader there came a need for a steering device which could stretch from the top deck of the stern down to the tiller which was sometimes located more than a deck below. The whipstaff became the temporary solution.

In a typical arrangement: an iron gooseneck was fitted at the fore end of the tiller. Then, a metal ring was fitted over this and secured with a pin. The ring was attached to a long thin pole (the whipstaff proper) and this pole connected the tiller to the helmsman one or more decks above it through a pivot point, roll, or rowle described as, "that round piece of wood or iron wherein the whip doth go and is made turn about that it may carry over the whip from side to side with more ease."[2]:p.173 The helmsman himself still usually did not stand on the topmost deck, but rather viewed what lay ahead of the ship through a small port or hatchway in the deck above him called a companion. To move the ship to port, the helmsman pushed the pole down and to the right; to move it to starboard, down and to the left. In this fashion the tiller might get as much as 20° of turn[3] though angles of between 5° and 10° seem more likely.[4] The tiller rested on a very strong horizontal wooden bar called the tiller sweep which was sheathed in metal and coated with soap and grease to minimize the drag of the tiller as it rode across it.

This arrangement, however, meant that the helmsman still had very limited range of control of the tiller's movement (no more than 15° to either side[2]:p.174) and he had to steer either with extremely limited views of the sails or sometimes dependent entirely upon the conn for direction. Emphasis had to be placed on the use of sails to control the ship's course, and this was imprecise and depended on the vicissitudes of the wind. Where extreme movement of the rudder was necessary, the use of relieving tackle had to be implemented.


  1. ^ Anderson, Romola; Anderson, R.C. (2003). A Short History of the Sailing Ship. Courier Dover. p. 156.  
  2. ^ a b Harland, John H.; Myers, Mark (1984). Seamanship in the age of sail. Naval Institute.  
  3. ^ Boudriot, Jean (1980). "The whipstaff". Nautical Research Journal (Washington: Nautical Research Guild) 26: 149–154. 
  4. ^ Lavery, Brian (1987). Arming and Fitting of English Ships of War, 1600-1815. Naval Institute. p. 15.  
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.