World Library  
Flag as Inappropriate
Email this Article

Shear zone

Article Id: WHEBN0001982853
Reproduction Date:

Title: Shear zone  
Author: World Heritage Encyclopedia
Language: English
Subject: Sveconorwegian orogeny, Blue Nile Basin, African Plate, Cameroon line, Mwembeshi Shear Zone
Collection: Geological Processes, Structural Geology
Publisher: World Heritage Encyclopedia

Shear zone

Pegmatite dyke offset by a steeply-dipping dextral shear zone, Cap de Creus

A shear zone is a very important structural discontinuity surface in the Earth's crust and upper mantle. It forms as a response to inhomogeneous deformation partitioning strain into planar or curviplanar high-strain zones. Intervening (crustal) blocks stay relatively unaffected by the deformation. Due to the shearing motion of the surrounding more rigid medium, a rotational, non co-axial component can be induced in the shear zone. Because the discontinuity surface usually passes through a wide depth-range, a great variety of different rock types with their characteristic structures are produced.


  • General introduction 1
  • Rocks produced in shear zones 2
  • Sense of shear 3
    • Indicators 3.1
  • Width of shear zones and resulting displacements 4
  • Strain softening and ductility 5
  • Occurrence and examples of shear zones 6
  • Importance 7
  • See also 8
  • Literature 9
  • References 10

General introduction

Diagram showing the major different types of shear zones. Displacement, shear strain, and depth distribution are also indicated.
Strength profile and change in rock type with depth in idealised fault/shear zone
Margin of a dextral sense ductile shear zone (about 20 m thick), showing transition from schists outside the zone to mylonites inside, Cap de Creus,

A shear zone is a zone of strong deformation (with a high strain rate) surrounded by rocks with a lower state of finite strain. It is characterised by a length to width ratio of more than 5:1.[1]

Shear zones form a continuum of geological structures, ranging from brittle shear zones (or faults) via brittle–ductile shear zones (or semibrittle shear zones), ductile–brittle to ductile shear zones. In brittle shear zones, the deformation is concentrated in a narrow fracture surface separating the wall rocks, whereas in a ductile shear zone the deformation is spread out through a wider zone, the deformation state varying continuously from wall to wall. Between these end-members, there are intermediate types of brittle–ductile (semibrittle) and ductile–brittle shear zones that can combine these geometric features in different proportions.

This continuum found in the structural geometries of shear zones reflects the different deformation mechanisms reigning in the crust, i.e. the changeover from brittle (fracturing) at or near the surface to ductile (flow) deformation with increasing depth. By passing through the brittle–semibrittle transition the ductile response to deformation is starting to set in. This transition is not tied to a specific depth, but rather occurs over a certain depth range - the so-called alternating zone, where brittle fracturing and plastic flow coexist. The main reason for this is found in the usually heteromineral composition of rocks, with different minerals showing different responses to applied stresses (for instance, under stress quartz reacts plastically long before feldspars do). Thus differences in lithology, grain size, and preexisting fabrics determine a different rheological response. Yet other, purely physical factors, influence the changeover depth as well, including:

In Scholz's model for a quartzo-feldspathic crust (with a geotherm taken from Southern California), the brittle–semibrittle transition starts at about 11 km depth with an ambient temperature of 300 °C. The underlying alternating zone then extends to roughly 16 km depth with a temperature of about 360 °C.[2] Below approximately 16 km depth, only ductile shear zones are found.

The seismogenic zone, in which earthquakes nucleate, is tied to the brittle domain, the schizosphere. Below an intervening alternating zone, there is the plastosphere. In the seismogenic layer, which occurs below an upper stability transition related to an upper seismicity cutoff (situated usually at about 4–5 km depth), true cataclasites start to appear. The seismogenic layer then yields to the alternating zone at 11 km depth. Yet big earthquakes can rupture both up to the surface and well into the alternating zone, sometimes even into the plastosphere.

Rocks produced in shear zones

The deformations in shear zones are responsible for the development of characteristic fabrics and mineral assemblages reflecting the reigning pressuretemperature (pT) conditions, flow type, movement sense, and deformation history. Shear zones are therefore very important structures for unravelling the history of a specific terrane.

Starting at the Earth's surface, the following rock types are usually encountered in a shear zone:

Both fault gouge and cataclasites are due to abrasive wear on brittle, seismogenic faults.

Mylonites start to occur with the onset of semibrittle behaviour in the alternating zone characterised by adhesive wear. Pseudotachylites can still be encountered here. By passing into greenschist facies conditions, the pseudotachylites disappear and only different types of mylonites persist. Striped gneisses are high-grade mylonites and occur at the very bottom of ductile shear zones.

Sense of shear

Asymmetric folds within a dextral sense shear zone, Cap de Creus
Asymmetric boudins of pegmatite within a dextral sense shear zone, Cap de Creus
Shear bands developed in a dextral sense shear zone, Cap de Creus

The sense of shear in a shear zone (dextral, sinistral, reverse or normal) can be deduced by macroscopic structures and by a plethora of microtectonic indicators.


The main macroscopic indicators are striations (slickensides), slickenfibers, and stretching– or mineral lineations. They indicate the direction of movement. With the aid of offset markers such as displaced layering and dykes, or the deflection (bending) of layering/foliation into a shear zone, one can additionally determine the sense of shear.

En echelon tension gash arrays (or extensional veins), characteristic of ductile-brittle shear zones, and sheath folds can also be valuable macroscopic shear-sense indicators.

Microscopic indicators consist of the following structures:

Width of shear zones and resulting displacements

The width of individual shear zones stretches from the grain scale to the kilometer scale. Crustal-scale shear zones (megashears) can become 10 km wide and consequently show very large displacements from tens to hundreds of kilometers.

Brittle shear zones (faults) usually widen with depth and with an increase in displacements.

Strain softening and ductility

Because shear zones are characterised by the localisation of strain, some form of strain softening must occur, in order for the affected host material to deform more plastically. The softening can be brought about by the following phenomena:

  • grain-size reductions.
  • geometric softening.
  • reaction softening.
  • fluid-related softening.

Furthermore, for a material to become more ductile (quasi-plastic) and undergo continuous deformation (flow) without fracturing, the following deformation mechanisms (on a grain scale) have to be taken into account:

Occurrence and examples of shear zones

Due to their deep penetration, shear zones are found in all metamorphic facies. Brittle shear zones are more or less ubiquitous in the upper crust. Ductile shear zones start at greenschist facies conditions and are therefore bound to metamorphic terranes.

Shear zones can occur in the following geotectonic settings:

  • transcurrent setting – steep to vertical:
    • strike-slip zones.
    • transform faults.
  • compressive setting — low-angle
    • recumbent fold nappes (at the base of).
    • subduction zones.
    • thrust sheets (at the base of).

Shear zones are dependent neither on rock type nor on geological age. Most often they are not isolated in their occurrence, but commonly form fractal-scaled, linked up, anastomosing networks which reflect in their arrangement the underlying dominant sense of movement of the terrane at that time.

Some good examples of shear zones of the strike-slip type are the South Armorican Shear Zone and the North Armorican Shear Zone in Brittany, the North Anatolian Fault Zone in Turkey, and the Dead Sea Fault in Israel. Shear zones of the transform type are the San Andreas Fault in California, and the Alpine Fault in New Zealand. A shear zone of the thrust type is the Moine Thrust in northwestern Scotland. An example for the subduction zone setting is the Japan Median Tectonic Line. Detachment fault related shear zones can be found in southeastern California, e.g. the Whipple Mountain Detachment Fault. An example of a huge anastomosing shear-zone is the Borborema Shear Zone in Brazil.


The importance of shear zones lies in the fact that they are major zones of weakness in the Earth's crust, sometimes extending into the upper mantle. They can be very long-lived features and commonly show evidence of several overprinting stages of activity. Material can be transported upwards or downwards in them, the most important one being water circulating dissolved ions. This can bring about metasomatism in the host rocks and even re-fertilise mantle material.

Shear zones can host economically viable mineralizations, examples being important gold deposits in Precambrian terranes.

See also


  • Passchier CW & Trouw RAJ. (1996). Microtectonics. Springer. ISBN 3-540-58713-6
  • Ramsay JG & Huber MI. (1987). The Techniques of Modern Structural Geology. Volume 2: Folds and Fractures. Academic Press. ISBN 0-12-576902-4
  • Scholz CH. (2002). The mechanics of earthquakes and faulting. Cambridge University Press. ISBN 0-521-65540-4


  1. ^ Ramsay JG. (1987). The Techniques of Modern Structural Geology. Volume 2: Folds and Fractures. Academic Press. ISBN 0-12-576902-4
  2. ^ Scholz CH. (2002). The mechanics of earthquakes and faulting. Cambridge University Press. ISBN 0-521-65540-4
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.