World Library  
Flag as Inappropriate
Email this Article

Reed pipe

Article Id: WHEBN0004223137
Reproduction Date:

Title: Reed pipe  
Author: World Heritage Encyclopedia
Language: English
Subject: Hungarian Folk Music, Music of Jordan, Renaissance music, Stock-and-horn, Dongjing (music)
Publisher: World Heritage Encyclopedia

Reed pipe

A schematic of a typical reed pipe.

A reed pipe (also referred to as a lingual pipe) is an pipe organs.


Reed pipes include all stops of the "Reed" class, and some stops from the "Hybrid" class. The reed stops of an organ are collectively called the "reed-work."[1]


A reed pipe comprises a metal tongue (the reed) which rests against a shallot, in which is carved a tunnel. The reed and shallot are held in place by a wooden wedge. This assembly protrudes from the underside of the block and hangs down into the boot. A tuning wire is inserted though the boot and is bent to hold the reed against the shallot. The wire is moved up or down using a tuning knife in order to change the length of the tongue that is permitted to vibrate, thereby changing the pitch produced by the pipe. The resonator joins with the upper opening of the shallot and extends above the boot. The resonator may be made in a wide variety of lengths, shapes, and configurations, depending on the desired tone quality.


As wind enters the boot, it travels over the reed, causing it to vibrate against the shallot. This produces the pipe's sound. The wind passes through the shallot and up into the resonator, which focuses and refines the sound wave produced by the reed. The length of the air column as well as the length, mass, and stiffness of the reed itself, determine the frequency of the instrument.[2]

Free reeds

A less-common type of reed construction is the free reed. The term refers to two types of reeds where the tongue does not beat directly against the shallot in order to produce the reed tone, which creates a unique sound (these are most commonly used on nineteenth-century German or French organs). In one case, the free reed stop will appear from the outside like a normal reed (complete with boot, tuning wire, and resonator, etc.). The only difference lies in the action of the tongue (see above), which beats "through" the shallot (hence the German term for the reed--durchschlagend). In the other form of the reed, an enclosed boot does not exist (as in normal reed pipes); therefore, all the tongues are held together in the same chamber, as in the expression pedal which varied the wind pressure delivered to the free reed stop. This type of free reed was popular among certain organ builders of the nineteenth century due to the increased interest in a more expressive aesthetic.

Tonal characteristics

The tonal characteristics of reed pipes are determined by several factors, the most important of which is the interaction between the shallot and the tongue. The thickness and curve of the tongue itself play an important role in determining the tonal quality of the pipe. When voicing a reed pipe, the voicer will take great care in shaping the curve of the tongue, because this controls how the tongue beats against the shallot. Whether the shallot is cylindrical or tapered (and, in the latter case, whether or not the taper is inverted) greatly affects the pipe's timbre. Likewise, the "cut" (referring to the depth of the shallot and the shape of the opening) and the closed-end shape (whether the closed end of the shallot is flat, domed, or Schiffschen) determine whether the tone is more Baroque or more Romantic. In addition, the type of block (whether a standard shape or a French "double-block") in which the reed assembly is set has an effect on the sound.

Scaling is important when determining the final tone color of a reed pipe, though it is not of primary importance as it is in flue pipe construction. This is because reed pipe resonators simply reinforce certain partials of the sound wave; the air column inside the resonator is not the primary vibrator. The shape of the resonator, however, is quite important: an inverted-conical resonator (such as is typical with a Trumpet rank) produces more harmonics than does a cylindrical resonator (like that of a Clarinet rank).


  1. ^ Peter Williams and Martin Renshaw. "Reed-work", Grove Music Online, ed. L. Macy (accessed August 30 2013), (subscription access).
  2. ^ The Organ: An Encyclopedia - Page 5 Douglas Earl Bush, Richard Kassel - 2006

External links

  • Encyclopedia of Organ Stops
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.