World Library  
Flag as Inappropriate
Email this Article

Plain old telephone service

Article Id: WHEBN0000160834
Reproduction Date:

Title: Plain old telephone service  
Author: World Heritage Encyclopedia
Language: English
Subject: Videophone, Twisted pair, History of videotelephony, Integrated Services Digital Network, Digital subscriber line
Collection: Telephone Services
Publisher: World Heritage Encyclopedia

Plain old telephone service

Plain old telephone service (POTS) is voice-grade telephone service employing analog signal transmission over copper loops.[1] POTS was the standard service offering from telephone companies from 1876 until 1988[2] when the now-obsolete Integrated Services Digital Network (ISDN) Basic Rate Interface (BRI) was introduced, followed by cellular telephone systems, and Voice over IP (VoIP). POTS remains the basic form of residential and small business service connection to the telephone network in many parts of the world. The term reflects the technology that has been available since the introduction of the public telephone system in the late 19th century, in a form mostly unchanged despite the introduction of Touch-Tone dialing, electronic telephone exchanges and fiber-optic communication into the public switched telephone network (PSTN).


  • Characteristics 1
  • Reliability 2
  • See also 3
  • References 4


POTS is characterized by several aspects:[3]

  • Bi-directional (full duplex) communications.
  • Using balanced signaling of voltage analogs of sound pressure waves on a two-wire copper loop
  • Restricted to a narrow frequency range of 300 to 3300 Hz, called the voiceband, which is much less than the human hearing range of 20 - 20,000 Hz
  • Call-progress tones, such as dial tone and ringing signal.
  • Dial pulse signaling of addresses.
  • BORSCHT functions.

The pair of wires from the central switch office to a subscriber's home is called a subscriber loop. It carries a direct current (DC) voltage at a nominal voltage of 48V when the receiver is on-hook, supplied by a power conversion system in the central office. This power conversion system is backed up with a bank of batteries, resulting in continuation of service during interruption of power to the customer supplied by their electrical utility.

The maximum resistance of the loop is 1700 ohms, which translates into a maximum loop length of 18,000 feet or 5 km using standard 24-gauge wire.

Many calling features became available to telephone subscribers after computerization of telephone exchanges during the 1980s. The services include voicemail, caller ID, call waiting, speed dialing, conference calls (three-way calling), enhanced 911, and Centrex services.

The communication circuits of the public switched telephone network continue to be modernized by advances in digital communications; however, other than improving sound quality, these changes have been mainly transparent to customers. In most cases, the function of the local loop presented to the customer for connection to telephone equipment is practically unchanged and remains compatible with pulse dialing telephones.

Due to the wide availability of traditional telephone services, new forms of communications devices such as modems and facsimile machines were initially designed to use traditional analog telephony to transmit digital information.


While POTS provides limited features, low bandwidth, and no mobile capabilities, it provides greater reliability than other telephony systems (mobile phone, VoIP, etc.). Many telephone service providers attempt to achieve dial-tone availability more than 99.999% of the time the telephone is taken off-hook. This is an often cited benchmark in marketing and systems-engineering comparisons, called the "five nines" reliability standard. It is equivalent to having a dial-tone available for all but about five minutes each year.

See also


  1. ^ "Federal Register Volume 59, Number 180 (Monday, September 19, 1994)". US Government Printing Office. 1994-09-19. Retrieved 2014-04-05. 
  2. ^ "I.430 : Basic user-network interface - Layer 1 specification". International Telecommunication Union. 2010-08-23. Retrieved 2015-05-07. 
  3. ^ Coll, Eric (2008). Telecom 101. Teracom Training Institute.  
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.