A parameter (from the Ancient Greek παρά, "para", meaning "beside, subsidiary" and μέτρον, "metron", meaning "measure"), in its common meaning, is a characteristic, feature, or measurable factor that can help in defining a particular system. A parameter is an important element to consider in evaluation or comprehension of an event, project, or situation. Parameter has more specific interpretations in mathematics, logic, linguistics, environmental science,^{[1]} and other disciplines.
Contents

Mathematical functions 1

Parametric equations 1.1

Examples 1.2

Mathematical models 1.3

Analytic geometry 1.4

Mathematical analysis 1.5

Statistics and econometrics 1.6

Probability theory 1.7

Computing 2

Computer programming 3

Engineering 4

Environmental science 5

Linguistics 6

Logic 7

See also 8

References 9
Mathematical functions
Mathematical functions have one or more arguments that are designated in the definition by variables. A function definition can also contain parameters, but unlike variables, parameters are not listed among the arguments that the function takes. When parameters are present, the definition actually defines a whole family of functions, one for every valid set of values of the parameters. For instance, one could define a general quadratic function by defining

f(x)=ax^2+bx+c;
here, the variable x designates the function's argument, but a, b, and c are parameters that determine which particular quadratic function is being considered. A parameter could be incorporated into the function name to indicate its dependence on the parameter. For instance, one may define the base b of a logarithm by

\log_b(x)=\frac{\log(x)}{\log(b)}
where b is a parameter that indicates which logarithmic function is being used. It is not an argument of the function, and will, for instance, be a constant when considering the derivative \textstyle\log_b'(x).
In some informal situations it is a matter of convention (or historical accident) whether some or all of the symbols in a function definition are called parameters. However, changing the status of symbols between parameter and variable changes the function as a mathematical object. For instance, the notation for the falling factorial power

n^{\underline k}=n(n1)(n2)\cdots(nk+1),
defines a polynomial function of n (when k is considered a parameter), but is not a polynomial function of k (when n is considered a parameter). Indeed, in the latter case, it is only defined for nonnegative integer arguments. More formal presentations of such situations typically start out with a function of several variables (including all those that might sometimes be called "parameters") such as

(n,k) \mapsto n^{\underline{k}}
as the most fundamental object being considered, then defining functions with fewer variables from the main one by means of currying.
Sometimes it is useful to consider all functions with certain parameters as parametric family, i.e. as an indexed family of functions. Examples from probability theory are given further below.
Parametric equations
In the special case of parametric equations, the independent variables are called the parameters. This is effectively a separate meaning of the word, although it arises as a degenerate case of the main one.
Examples

In a section on frequently misused words in his book The Writer's Art, James J. Kilpatrick quoted a letter from a correspondent, giving examples to illustrate the correct use of the word parameter:
“

W.M. Woods ... a mathematician ... writes ... "... a variable is one of the many things a parameter is not." ... The dependent variable, the speed of the car, depends on the independent variable, the position of the gas pedal.

”

“

[Kilpatrick quoting Woods] "Now ... the engineers ... change the lever arms of the linkage ... the speed of the car ... will still depend on the pedal position ... but in a ... different manner. You have changed a parameter"

”


A parametric equaliser is an audio filter that allows the frequency of maximum cut or boost to be set by one control, and the size of the cut or boost by another. These settings, the frequency level of the peak or trough, are two of the parameters of a frequency response curve, and in a twocontrol equaliser they completely describe the curve. More elaborate parametric equalisers may allow other parameters to be varied, such as skew. These parameters each describe some aspect of the response curve seen as a whole, over all frequencies. A graphic equaliser provides individual level controls for various frequency bands, each of which acts only on that particular frequency band.

If asked to imagine the graph of the relationship y = ax^{2}, one typically visualizes a range of values of x, but only one value of a. Of course a different value of a can be used, generating a different relation between x and y. Thus a is a parameter: it is less variable than the variable x or y, but it is not an explicit constant like the exponent 2. More precisely, changing the parameter a gives a different (though related) problem, whereas the variations of the variables x and y (and their interrelation) are part of the problem itself.

In calculating income based on wage and hours worked (income equals wage multiplied by hours worked), it is typically assumed that the number of hours worked is easily changed, but the wage is more static. This makes 'wage' a parameter, 'hours worked' an independent variable, and 'income' a dependent variable.
Mathematical models
In the context of a mathematical model, such as a probability distribution, the distinction between variables and parameters was described by Bard as follows:

We refer to the relations which supposedly describe a certain physical situation, as a model. Typically, a model consists of one or more equations. The quantities appearing in the equations we classify into variables and parameters. The distinction between these is not always clear cut, and it frequently depends on the context in which the variables appear. Usually a model is designed to explain the relationships that exist among quantities which can be measured independently in an experiment; these are the variables of the model. To formulate these relationships, however, one frequently introduces "constants" which stand for inherent properties of nature (or of the materials and equipment used in a given experiment). These are the parameters.^{[2]}
Analytic geometry
In analytic geometry, curves are often given as the image of some function. The argument of the function is invariably called "the parameter". A circle of radius 1 centered at the origin can be specified in more than one form:

x^2+y^2=1

(x,y)=(\cos \; t,\sin \; t)

where t is the parameter.
A somewhat more detailed description can be found at parametric equation.
Mathematical analysis
In mathematical analysis, integrals dependent on a parameter are often considered. These are of the form

F(t)=\int_{x_0(t)}^{x_1(t)}f(x;t)\,dx.
In this formula, t is the argument of the function F, and on the righthand side the parameter on which the integral depends. When evaluating the integral, t is held constant, and so it is considered a parameter. If we are interested in the value of F for different values of t, we now consider it a variable. The quantity x is a dummy variable or variable of integration (confusingly, also sometimes called a parameter of integration).
Statistics and econometrics
In statistics and econometrics, the probability framework above still holds, but attention shifts to estimating the parameters of a distribution based on observed data, or testing hypotheses about them. In classical estimation these parameters are considered "fixed but unknown", but in Bayesian estimation they are treated as random variables, and their uncertainty is described as a distribution.
A statistic is a numerical characteristic of a sample that can be used as an estimate of the corresponding parameter, the numerical characteristic of the population from which the sample was drawn. For example, the sample mean (usually denoted \overline X) can be used as an estimate of the mean parameter (μ) of the population from which the sample was drawn.
It is possible to make statistical inferences without assuming a particular parametric family of probability distributions. In that case, one speaks of nonparametric statistics as opposed to the parametric statistics just described. For example, a test based on Spearman's rank correlation coefficient would be called nonparametric since the statistic is computed from the rankorder of the data disregarding their actual values (and thus regardless of the distribution they were sampled from), whereas those based on the Pearson productmoment correlation coefficient are parametric tests since it is computed directly from the data values and thus estimates the parameter known as the population correlation.
Probability theory
These traces all represent Poisson distributions, but with different values for the parameter λ
In
probability theory, one may describe the
distribution of a
random variable as belonging to a
family of
probability distributions, distinguished from each other by the values of a finite number of
parameters. For example, one talks about "a
Poisson distribution with mean value λ". The function defining the distribution (the
probability mass function) is:

f(k;\lambda)=\frac{e^{\lambda} \lambda^k}{k!}.
This example nicely illustrates the distinction between constants, parameters, and variables. e is Euler's number, a fundamental mathematical constant. The parameter λ is the mean number of observations of some phenomenon in question, a property characteristic of the system. k is a variable, in this case the number of occurrences of the phenomenon actually observed from a particular sample. If we want to know the probability of observing k_{1} occurrences, we plug it into the function to get f(k_1 ; \lambda). Without altering the system, we can take multiple samples, which will have a range of values of k, but the system is always characterized by the same λ.
For instance, suppose we have a radioactive sample that emits, on average, five particles every ten minutes. We take measurements of how many particles the sample emits over tenminute periods. The measurements exhibit different values of k, and if the sample behaves according to Poisson statistics, then each value of k will come up in a proportion given by the probability mass function above. From measurement to measurement, however, λ remains constant at 5. If we do not alter the system, then the parameter λ is unchanged from measurement to measurement; if, on the other hand, we modulate the system by replacing the sample with a more radioactive one, then the parameter λ would increase.
Another common distribution is the normal distribution, which has as parameters the mean μ and the variance σ².
In these above examples, the distributions of the random variables are completely specified by the type of distribution, i.e. Poisson or normal, and the parameter values, i.e. mean and variance. In such a case, we have a parameterized distribution.
It is possible to use the sequence of moments (mean, mean square, ...) or cumulants (mean, variance, ...) as parameters for a probability distribution: see Statistical parameter.
Computing
In computing a parameter is defined as "a reference or value that is passed to a function, procedure, subroutine, command, or program."^{[3]} For example, a program may be passed the name of a file on which it should perform some function.
Computer programming
In computer programming two notions of parameter are commonly used, and referred to as parameters and arguments, or more formally (in computer science) as a formal parameter and an actual parameter. In casual usage these are sometimes not distinguished, and the terms parameter and argument are incorrectly used interchangeably.
In the definition of a function such as

f(x) = x + 2,
x is a formal parameter (parameter). When the function is evaluated, as in

f(3) or y = f(3) + 5,
3 is the actual parameter (argument): the value that is substituted for the formal parameter used in the function definition.
These concepts are discussed in a more precise way in functional programming and its foundational disciplines, lambda calculus and combinatory logic. Terminology varies between languages: some computer languages such as C define parameter and argument as given here, while Eiffel for instance uses an alternative convention.
Engineering
In engineering (especially involving data acquisition) the term parameter sometimes loosely refers to an individual measured item. This usage isn't consistent, as sometimes the term channel refers to an individual measured item, with parameter referring to the setup information about that channel.
"Speaking generally, properties are those physical quantities which directly describe the physical attributes of the system; parameters are those combinations of the properties which suffice to determine the response of the system. Properties can have all sorts of dimensions, depending upon the system being considered; parameters are dimensionless, or have the dimension of time or its reciprocal."^{[4]}
The term can also be used in engineering contexts, however, as it is typically used in the physical sciences.
Environmental science
In environmental science and particularly in chemistry and microbiology, a parameter is used to describe a discrete chemical or microbiological entity which can be assigned a value which is commonly a concentration. The value may also be a logical entity (present or absent), a statistical result such as a 95%ile value or in some cases a subjective value
Linguistics
Within linguistics, the word "parameter" is almost exclusively used to denote a binary switch in a Universal Grammar within a Principles and Parameters framework.
Logic
In logic, the parameters passed to (or operated on by) an open predicate are called parameters by some authors (e.g., Prawitz, "Natural Deduction"; Paulson, "Designing a theorem prover"). Parameters locally defined within the predicate are called variables. This extra distinction pays off when defining substitution (without this distinction special provision must be made to avoid variable capture). Others (maybe most) just call parameters passed to (or operated on by) an open predicate variables, and when defining substitution have to distinguish between free variables and bound variables.
See also
References

^ Parameter from the Free Dictionary

^ Bard, Yonathan (1974). Nonlinear Parameter Estimation. New York:

^ "The Free Dictionary: Parameter". Retrieved March 3, 2014.

^ Trimmer, John D. (1950). Response of Physical Systems. New York: Wiley. p. 13.
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.