In mathematics, an integral transform is any transform T of the following form:

(Tf)(u) = \int \limits_{t_1}^{t_2} K(t, u)\, f(t)\, dt
The input of this transform is a function f, and the output is another function Tf. An integral transform is a particular kind of mathematical operator.
There are numerous useful integral transforms. Each is specified by a choice of the function K of two variables, the kernel function or nucleus of the transform.
Some kernels have an associated inverse kernel K^{−1}(u, t) which (roughly speaking) yields an inverse transform:

f(t) = \int \limits_{u_1}^{u_2} K^{1}( u,t )\, (Tf)(u)\, du
A symmetric kernel is one that is unchanged when the two variables are permuted.
Contents

Motivation 1

History 2

Usage example 3

Table of transforms 4

Different domains 5

General theory 6

See also 7

References 8
Motivation
Mathematical notation aside, the motivation behind integral transforms is easy to understand. There are many classes of problems that are difficult to solve—or at least quite unwieldy algebraically—in their original representations. An integral transform "maps" an equation from its original "domain" into another domain. Manipulating and solving the equation in the target domain can be much easier than manipulation and solution in the original domain. The solution is then mapped back to the original domain with the inverse of the integral transform.
Also there are many applications of probability that rely on integral transforms, such as "pricing kernel" or stochastic discount factor, or the smoothing of data recovered from robust statistics, see kernel (statistics).
History
The precursor of the transforms were the Fourier series to express functions in finite intervals. Later the Fourier transform was developed to remove the requirement of finite intervals.
Using the Fourier series, just about any practical function of time (the voltage across the terminals of an electronic device for example) can be represented as a sum of sines and cosines, each suitably scaled (multiplied by a constant factor), shifted (advanced or retarded in time) and "squeezed" or "stretched" (increasing or decreasing the frequency). The sines and cosines in the Fourier series are an example of an orthonormal basis.
Usage example
As an example of an application of integral transforms, consider the Laplace transform. This is a technique that maps differential or integrodifferential equations in the "time" domain into polynomial equations in what is termed the "complex frequency" domain. (Complex frequency is similar to actual, physical frequency but rather more general. Specifically, the imaginary component ω of the complex frequency s = σ + iω corresponds to the usual concept of frequency, viz., the rate at which a sinusoid cycles, whereas the real component σ of the complex frequency corresponds to the degree of "damping". ) The equation cast in terms of complex frequency is readily solved in the complex frequency domain (roots of the polynomial equations in the complex frequency domain correspond to eigenvalues in the time domain), leading to a "solution" formulated in the frequency domain. Employing the inverse transform, i.e., the inverse procedure of the original Laplace transform, one obtains a timedomain solution. In this example, polynomials in the complex frequency domain (typically occurring in the denominator) correspond to power series in the time domain, while axial shifts in the complex frequency domain correspond to damping by decaying exponentials in the time domain.
The Laplace transform finds wide application in physics and particularly in electrical engineering, where the characteristic equations that describe the behavior of an electric circuit in the complex frequency domain correspond to linear combinations of exponentially damped, scaled, and timeshifted sinusoids in the time domain. Other integral transforms find special applicability within other scientific and mathematical disciplines.
Another usage example is the kernel in path integral:

\psi(x,t) = \int_{\infty}^\infty \psi(x',t') K(x,t; x', t') dx'.
This state that the total amplitude to arrive at (x,t) [that is, \psi(x,t)] is the sum, or the integral, over all possible value of x' of the total amplitude to arrive at the point (x',t') [that is, \psi(x',t' )] multiplied by the amplitude to go from x' to x [that is, K(x,t;x',t').^{[1]} It is often referred to as the propagator of a given system. This (physics) kernel is the kernel of integral transform. However, for each quantum system, there is a different kernel.^{[2]}
Table of transforms
Table of integral transforms
Transform

Symbol

K

f(t)

t_{1}

t_{2}

K^{−1}

u_{1}

u_{2}

Fourier transform

\mathcal{F}

\frac{e^{iut}}{\sqrt{2 \pi}}

L_1

−∞

∞

\frac{e^{iut}}{\sqrt{2 \pi}}

−∞

∞

Fourier sine transform

\mathcal{F}_s

\sqrt{\frac{2}{\pi}} \sin(ut)

on [0,\infty), realvalued

0

∞

\sqrt{\frac{2}{\pi}} \sin(ut)

0

∞

Fourier cosine transform

\mathcal{F}_c

\sqrt{\frac{2}{\pi}} \cos(ut)

on [0,\infty), realvalued

0

∞

\sqrt{\frac{2}{\pi}} \cos(ut)

0

∞

Hartley transform

\mathcal{H}

\frac{\cos(ut)+\sin(ut)}{\sqrt{2 \pi}}


−∞

∞

\frac{\cos(ut)+\sin(ut)}{\sqrt{2 \pi}}

−∞

∞

Mellin transform

\mathcal{M}

t^{u−1}


0

∞

\frac{t^{u}}{2\pi i}\,

c\!\!i\infty

c\!+\!i\infty

Twosided Laplace
transform

\mathcal{B}

e^{−ut}


−∞

∞

\frac{e^{ut}}{2\pi i}

c\!\!i\infty

c\!+\!i\infty

Laplace transform

\mathcal{L}

e^{−ut}


0

∞

\frac{e^{ut}}{2\pi i}

c\!\!i\infty

c\!+\!i\infty

Weierstrass transform

\mathcal{W}

\frac{e^{\frac{(ut)^2}{4}}}{\sqrt{4\pi}}\,


−∞

∞

\frac{e^{\frac{(ut)^2}{4}}}{i\sqrt{4\pi}}

c\!\!i\infty

c\!+\!i\infty

Hankel transform


t\,J_\nu(ut)


0

∞

u\,J_\nu(ut)

0

∞

Abel transform


\frac{2t}{\sqrt{t^2u^2}}


u

∞

\frac{1}{\pi\sqrt{u^2\!\!t^2}}\frac{d}{du}

t

∞

Hilbert transform

\mathcal{H}il

\frac{1}{\pi}\frac{1}{ut}


−∞

∞

\frac{1}{\pi}\frac{1}{ut}

−∞

∞

Poisson kernel


\frac{1r^2}{12r\cos\theta +r^2}


0

2π




Identity transform


δ(u−t)


t_{1} < u

t_{2} > u

δ(u−t)

u_{1} < t

u_{2} > t

In the limits of integration for the inverse transform, c is a constant which depends on the nature of the transform function. For example, for the one and twosided Laplace transform, c must be greater than the largest real part of the zeroes of the transform function.
Different domains
Here integral transforms are defined for functions on the real numbers, but they can be defined more generally for functions on a group.

If instead one uses functions on the circle (periodic functions), integration kernels are then biperiodic functions; convolution by functions on the circle yields circular convolution.

If one uses functions on the cyclic group of order n (C_n or \mathbf{Z}/n\mathbf{Z}), one obtains n × n matrices as integration kernels; convolution corresponds to circulant matrices.
General theory
Although the properties of integral transforms vary widely, they have some properties in common. For example, every integral transform is a linear operator, since the integral is a linear operator, and in fact if the kernel is allowed to be a generalized function then all linear operators are integral transforms (a properly formulated version of this statement is the Schwartz kernel theorem).
The general theory of such integral equations is known as Fredholm theory. In this theory, the kernel is understood to be a compact operator acting on a Banach space of functions. Depending on the situation, the kernel is then variously referred to as the Fredholm operator, the nuclear operator or the Fredholm kernel.
See also
References

^ Eq 3.42 in Feynman and Hibbs, Quantum Mechanics and Path Integrals, emended edition:

^ Mathematically, what is the kernel in path integral?

A. D. Polyanin and A. V. Manzhirov, Handbook of Integral Equations, CRC Press, Boca Raton, 1998. ISBN 0849328764

R. K. M. Thambynayagam, The Diffusion Handbook: Applied Solutions for Engineers, McGrawHill, New York, 2011. ISBN 9780071751841

Hazewinkel, Michiel, ed. (2001), "Integral transform",

Tables of Integral Transforms at EqWorld: The World of Mathematical Equations.
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.