World Library  
Flag as Inappropriate
Email this Article

Explorer 3


Explorer 3

Explorer 3
Photograph of the nearly identical Explorer 1
Mission type Earth science
Operator Army Ballistic Missile Agency (ABMA)
Harvard designation 1958 Gamma 1
Mission duration 93 days
Spacecraft properties
Manufacturer Jet Propulsion Laboratory
Launch mass 14.1 kilograms (31 lb)
Start of mission
Launch date March 26, 1958, 17:31 (1958-03-26T17:31Z) UTC
Rocket Juno I
Launch site Cape Canaveral LC-5
End of mission
Decay date Did not recognize date. Try slightly modifying the date in the first parameter.
Orbital parameters
Reference system Geocentric
Regime Medium Earth
Semi-major axis 7,870.7 kilometers (4,890.6 mi)
Eccentricity 0.165894
Perigee 186 kilometers (116 mi)
Apogee 2,799 kilometers (1,739 mi)
Inclination 33.38 degrees
Period 115.7 minutes

Explorer 3 (international designation 1958 Gamma) was an artificial satellite of the Earth, nearly identical to the first United States artificial satellite Explorer 1 in its design and mission. It was the second successful launch in the Explorer program.


The satellite was launched from Cape Canaveral Air Force Station, Florida at 17:31:00 UTC on March 26, 1958, by the Juno I vehicle. The Juno I had its origins in the United States Army's Project Orbiter in 1954. The project was canceled in 1955, however, when the decision was made to proceed with Project Vanguard.

Following the launch of the Soviet Sputnik 1 on October 4, 1957, Army Ballistic Missile Agency (ABMA) was directed to proceed with the launching of a satellite using the Jupiter-C, which had already been flight-tested in nose-cone re-entry tests for the Jupiter IRBM (intermediate-range ballistic missile). Working closely together, ABMA and JPL completed the job of modifying the Jupiter-C to the Juno I and building the Explorer I in 84 days.

Spacecraft design

Explorer 3 was launched in conjunction with the International Geophysical Year (IGY) by the U.S. Army (Ordnance) into an eccentric orbit. The objective of this spacecraft was a continuation of experiments started with Explorer 1. The payload consisted of a cosmic ray counter (a Geiger-Müller tube), and a micrometeorite detector (a wire grid array and acoustic detector). The Explorer 3 spacecraft was spin-stabilized and had an on-board tape recorder to provide a complete radiation history for each orbit. It was discovered soon after launch that the satellite was in a tumbling motion with a period of about 7 seconds. Explorer 3 decayed from orbit on June 27, 1958, after 93 days of operation.

Mission results

The discovery of the Van Allen radiation belt by the Explorer satellites was considered to be one of the outstanding discoveries of the IGY.

Explorer 3 was placed in an orbit with a perigee of 186 kilometers and an apogee of 2799 kilometers having a period of 115.7 minutes. Its total weight was 14.1 kilograms, of which 8.4 kg was instrumentation. The instrument section at the front end of the satellite and the empty scaled-down fourth-stage rocket casing orbited as a single unit, spinning around its long axis at 750 revolutions per minute.

Instrumentation consisted of a cosmic ray detection package and a ring of micrometeorite erosion gauges. The Explorer 3 spacecraft was spin-stabilized and had an on-board tape recorder to provide a complete radiation history for each orbit. Data from these instruments was transmitted to the ground by a 60 milliwatt transmitter operating on 108.03 MHz and a 10 milliwatt transmitter operating on 108.00 MHz.

Transmitting antennas consisted of two fiberglass slot antennas in the body of the satellite itself and four flexible whips forming a turnstile antenna. The rotation of the satellite about its long axis kept the flexible whips extended.

The external skin of the instrument section was painted in alternate strips of white and dark green to provide passive temperature control of the satellite. The proportions of the light and dark strips were determined by studies of shadow-sunlight intervals based on firing time, trajectory, orbit, and inclination.

Electrical power was provided by nickel-cadmium chemical batteries that made up approximately 40

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.