Edta

"EDTA" redirects here. For other uses, see EDTA (disambiguation).
Template:Chembox ChEMBL
Ethylenediaminetetraacetic acid

Template:Chemboximage

Di-sodium EDTA
Identifiers
Abbreviations EDTA, H4EDTA
CAS number 60-00-4 YesY
PubChem 6049 YesY
ChemSpider 5826 YesY
UNII 9G34HU7RV0 YesY
EC number 200-449-4
UN number 3077
DrugBank DB00974
KEGG D00052 YesY
MeSH Edetic+Acid
ChEBI CHEBI:42191 YesY
RTECS number AH4025000
ATC code AB03
Beilstein Reference 1716295
Gmelin Reference 144943
Jmol-3D images Image 2
Properties
Molecular formula C10H16N2O8
Molar mass 292.24 g mol−1
Appearance Colourless crystals
Density 860 mg mL−1 (at 20 °C)
log P −0.836
Acidity (pKa) 1.782
Basicity (pKb) 12.215
Thermochemistry
Std enthalpy of
formation
ΔfHo298
−1.7654–−1.7580 MJ mol−1
Std enthalpy of
combustion
ΔcHo298
−4.4617–−4.4545 MJ mol−1
Pharmacology
Routes of
administration
  • Intramuscular
  • Intravenous
Hazards
GHS pictograms
GHS signal word WARNING
GHS hazard statements H319
GHS precautionary statements P305+351+338
EU Index 607-429-00-8
EU classification Xi
R-phrases R36
S-phrases (S2), S26
NFPA 704
0
1
0
LD50 2.580 g kg−1 (oral, rat)
Related compounds
Related alkanoic acids
Related compounds
 YesY (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Ethylenediaminetetraacetic acid, widely abbreviated as EDTA (for other names, see Table), is an aminopolycarboxylic acid and a colourless, water-soluble solid. Its conjugate base is named ethylenediaminetetraacetate. It is widely used to dissolve limescale. Its usefulness arises because of its role as a hexadentate ("six-toothed") ligand and chelating agent, i.e. its ability to "sequester" metal ions such as Ca2+ and Fe3+. After being bound by EDTA, metal ions remain in solution but exhibit diminished reactivity. EDTA is produced as several salts, notably disodium EDTA and calcium disodium EDTA.

Synthesis

The compound was first described in 1935 by Ferdinand Munz, who prepared the compound from ethylenediamine and chloroacetic acid.[1] Today, EDTA is mainly synthesised from ethylenediamine (1,2-diaminoethane), formaldehyde, and sodium cyanide.[2] This route yields the sodium salt, which can be converted in a subsequent step into the acid forms:

H2NCH2CH2NH2 + 4 CH2O + 4 NaCN + 4 H2O → (NaO2CCH2)2NCH2CH2N(CH2CO2Na)2 + 4 NH3
(NaO2CCH2)2NCH2CH2N(CH2CO2Na)2 + 4 HCl → (HO2CCH2)2NCH2CH2N(CH2CO2H)2 + 4 NaCl

In this way, about 80M kilograms are produced each year. Impurities cogenerated by this route include glycine and nitrilotriacetic acid; they arise from reactions of the ammonia coproduct.[3]

Nomenclature

To describe EDTA and its various protonated forms, chemists distinguish between EDTA4−, the conjugate base that is the ligand, and H4EDTA, the precursor to that ligand. At very low pH (very acidic conditions) the fully protonated H6EDTA2+ form predominates, whereas at very high pH or very basic condition, the fully deprotonated EDTA4− form is prevalent. In this article, the term EDTA is used to mean H4-xEDTAx-, whereas in its complexes EDTA4− stands for the tetra-deprotonated ligand.

Coordination chemistry principles

In coordination chemistry, EDTA4− is a member of the aminopolycarboxylic acid family of ligands. EDTA4− usually binds to a metal cation through its two amines and four carboxylates. Many of the resulting coordination compounds adopt octahedral geometry. Although of little consequence for its applications, these octahedral complexes are chiral. The anion [Co(EDTA)] has been resolved into enantiomers.[4] Many complexes of EDTA4− adopt more complex structures due to (i) the formation of an additional bond to water, i.e. seven-coordinate complexes, or (ii) the displacement of one carboxylate arm by water. Ferric complex of EDTA is seven-coordinate.[5] Early work on the development of EDTA was undertaken by Gerold Schwarzenbach in the 1940s.[6] EDTA forms especially strong complexes with Mn(II), Cu(II), Fe(III), Pb (II) and Co(III).[7]

Several features of EDTA's complexes are relevant to its applications. First, because of its high denticity, this ligand has a high affinity for metal cations:

[Fe(H2O)6]3+ + H4EDTA \overrightarrow{\leftarrow} [Fe(EDTA)] + 6 H2O + 4 H+ (Keq = 1025.1)

Written in this way, the equilibrium quotient shows that metal ions compete with protons for binding to EDTA. Because metal ions are extensively enveloped by EDTA, their catalytic properties are often suppressed. Finally, since complexes of EDTA4− are anionic, they tend to be highly soluble in water. For this reason, EDTA is able to dissolve deposits of metal oxides and carbonates.

Uses

Industry

In industry, EDTA is mainly used to sequester metal ions in aqueous solution. In the textile industry, it prevents metal ion impurities from modifying colours of dyed products. In the pulp and paper industry, EDTA inhibits the ability of metal ions, especially Mn2+, from catalyzing the disproportionation of hydrogen peroxide, which is used in "chlorine-free bleaching." In a similar manner, EDTA is added to some food as a preservative or stabilizer to prevent catalytic oxidative decoloration, which is catalyzed by metal ions.[8] In soft drinks containing ascorbic acid and sodium benzoate, EDTA mitigates formation of benzene (a carcinogen).[9]

The reduction of water hardness in laundry applications and the dissolution of scale in boilers both rely on EDTA and related complexants to bind Ca2+, Mg2+, as well as other metal ions. Once bound to EDTA, these metal centers tend not to form precipitates or to interfere with the action of the soaps and detergents. For similar reasons, cleaning solutions often contain EDTA.

The solubilization of ferric ions, at or below near neutral pH can be accomplished using EDTA. This property is useful in agriculture including hydroponics. However, given the pH dependence of ligand formation, EDTA is not helpful for improving Fe solubility in above neutral soils.[10] Otherwise, at near-neutral pH and above, iron(III) forms insoluble salts, which are less bioavailable to susceptible plant species. Aqueous [Fe(edta)] is used for removing ("scrubbing") hydrogen sulfide from gas streams. This conversion is achieved by oxidizing the hydrogen sulfur to elemental sulfur, which is non-volatile:

2 [Fe(edta)] + H2S → 2 [Fe(edta)]2− + S + 2 H+

In this application, the ferric center is reduced to its ferrous derivative, which can then be reoxidized by air. In similar manner, nitrogen oxides are removed from gas streams using [Fe(edta)]2−. The oxidizing properties of [Fe(edta)] are also exploited in photography, where it is used to solubilize silver particles.[3]

EDTA was used in the separation of the lanthanide metals by ion-exchange chromatography. Perfected by F.H. Spedding et al. in 1954, the method relies on the steady increase in stability constant of the lanthanide EDTA complexes with atomic number. Using sulfonated polystyrene beads and copper(II) as a retaining ion, EDTA causes the lanthanides to migrate down the column of resin while separating into bands of pure lanthanide. The lanthanides elute in order of decreasing atomic number. Due to the expense of this method, relative to counter-current solvent extraction, ion-exchange is now used only to obtain the highest purities of lanthanide (typically greater than 4N, 99.99%).

Medicine

EDTA is used to bind metal ions in the practice of chelation therapy, e.g., for treating mercury and lead poisoning.[11] It is used in a similar manner to remove excess iron from the body. This therapy is used to treat the complication of repeated blood transfusions, as would be applied to treat thalassaemia. The U.S. FDA approved the use of EDTA for lead poisoning[12] on July 16, 1953, under the brand name of Versenate,[13] which was licensed to the pharmaceutical company Riker. Alternative medical practitioners believe EDTA acts as a powerful antioxidant to prevent free radicals from injuring blood vessel walls, therefore reducing atherosclerosis.[14] The U.S. FDA has not approved it for the treatment of atherosclerosis.[15]

Dentists and endodontists use EDTA solutions to remove inorganic debris (smear layer) and lubricate the canals in endodontics. This procedure helps prepare root canals for obturation. Furthermore, EDTA solutions with the addition of a surfactant loosen up calcifications inside a root canal and allow instrumentation (canals shaping) and facilitate apical advancement of a file in a tight/calcified root canal towards the apex. It serves as a preservative (usually to enhance the action of another preservative such as benzalkonium chloride or thiomersal) in ocular preparations and eyedrops.[16] In evaluating kidney function, the complex [Cr(edta)] is administered intravenously and its filtration into the urine is monitored. This method is useful for evaluating glomerular filtration rate.[17]

EDTA is used extensively in the analysis of blood. It is an anticoagulant for blood samples for CBC/FBEs.

Laboratory studies also suggest that EDTA chelation may prevent collection of platelets on the lining of the vessel [such as arteries] (which can otherwise lead to formation of blood clots, which itself is associated with atheromatous plaque formation or rupture, and thereby ultimately disrupts blood flow). These ideas have so far been proven ineffective;[18] however, a major clinical study of the effects of EDTA on coronary arteries is currently (2008) proceeding.[19] EDTA played a role in the O.J. Simpson trial when the defense alleged that one of the blood samples collected from Simpson's estate was found to contain traces of the compound.[20]

EDTA is a slime dispersant, and has been found to be highly effective in reducing bacterial growth during implantation of intraocular lenses (IOLs).[21]

Cosmetics

In shampoos, cleaners and other personal care products EDTA salts are added as a sequestering agent to improve their stability in air.[22]

Laboratory applications

In the laboratory, EDTA is widely used for scavenging metal ions: In biochemistry and molecular biology, ion depletion is commonly used to deactivate metal-dependent enzymes, either as an assay for their reactivity or to suppress damage to DNA or proteins.[23] In analytical chemistry, EDTA is used in complexometric titrations and analysis of water hardness or as a masking agent to sequester metal ions that would interfere with the analyses. EDTA finds many specialized uses in the biomedical laboratories, such as in veterinary ophthalmology as an anticollagenase to prevent the worsening of corneal ulcers in animals. In tissue culture EDTA is used as a chelating agent that binds to calcium and prevents joining of cadherins between cells, preventing clumping of cells grown in liquid suspension, or detaching adherent cells for passaging. In histopathology, EDTA can be used as a decalcifying agent making it possible to cut sections using a microtome once the tissue sample is demineralised. EDTA is also known to inhibit a range of metallopeptidases, the method of inhibition occurs via the chelation of the metal ion required for catalytic activity.[24] EDTA can also be used to test for bioavailability of heavy metals in sediments.

Toxicity and environmental considerations

EDTA is in such widespread use that questions have been raised whether it is a persistent organic pollutant. Research indicates that under many conditions, EDTA is fully biodegradable. However, when simulating certain non-optimal degradation conditions (high pH), less than 1% of the EDTA was degraded instead to ethylenediaminetriacetic acid, which can then cyclize to 3-ketopiperazine-N,N-diacetate, a cumulative, persistent, organic chemical with unknown effects on the environment.[25] An alternative chelating agent with fewer environmental pollution implications is EDDS.

EDTA exhibits low acute toxicity with LD50 (rat) of 2.0 – 2.2 g/kg.[3] It has been found to be both cytotoxic and weakly genotoxic in laboratory animals. Oral exposures have been noted to cause reproductive and developmental effects.[22] The same study by Lanigan[22] also found that both dermal exposure to EDTA in most cosmetic formulations and inhalation exposure to EDTA in aerosolized cosmetic formulations would produce exposure levels below those seen to be toxic in oral dosing studies.

Methods of detection and analysis

The most sensitive method of detecting and measuring EDTA in biological samples is selected-reaction-monitoring capillary-electrophoresis mass-spectrometry (abbreviation SRM-CE/MS), which has a detection limit of 7.3 ng/mL in human plasma and a quantitation limit of 15 ng/mL.[26] This method works with sample volumes as small as ~7-8 nL.[26]

EDTA has also been measured in non-alcoholic beverages using high performance liquid chromatography (HPLC) at a level of 2.0 μg/mL.[27][28]

See also

References

External links

  • The EDTA
  • EDTA: Molecule of the Month
  • EDTA Determination of Total Water Hardness
  • EDTA: the chelating agent under environmental scrutiny, Química Nova, Nov.-Dec., 2003 (text version)
  • EDTA: the chelating agent under environmental scrutiny, Química Nova, Nov.-Dec., 2003 (PDF version)
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.