World Library  
Flag as Inappropriate
Email this Article


Front of locomotive to the left
The Stephenson 0-4-2, 1834

Under the Whyte notation for the classification of steam locomotives, 0-4-2 represents the wheel arrangement with no leading wheels, four powered and coupled driving wheels on two axles, and two trailing wheels on one axle. The configuration was often used for tank engines, which is noted by adding letters to the configuration, such as 0-4-2T for a conventional side-tank locomotive, 0-4-2ST for a saddle-tank locomotive, 0-4-2WT for a well-tank locomotive, and 0-4-2RT for a rack-equipped tank locomotive. In the 1880s and 1890s the type was also used for some famous tender locomotives.

Other equivalent classifications are:


  • Overview 1
  • Usage 2
    • Austria 2.1
    • Finland 2.2
    • Indonesia 2.3
    • New Zealand 2.4
    • North America 2.5
    • South Africa 2.6
      • Standard gauge 2.6.1
      • Cape gauge 2.6.2
      • Narrow gauges 2.6.3
    • United Kingdom 2.7
  • See also 3
  • References 4


The earliest recorded 0-4-2 locomotives were three goods engines built by Robert Stephenson and Company for the Stanhope and Tyne Railway in 1834.[1]

Ajax preserved at the Technisches Museum Wien

The first locomotive built in Germany in 1838, the Saxonia, was also an 0-4-2. In the same year Todd, Kitson & Laird built two examples for the Liverpool and Manchester Railway, one of which, LMR 57 Lion, has been preserved. The Lion had a top speed of 45mph and could pull up to 200 tons (203 tones).[2]

Over the next quarter of a century the type was adopted by many early British railways for freight haulage since it afforded greater adhesion than the contemporary 2-2-2 passenger configuration, although in time they were also used for mixed traffic duties.



The Emperor Ferdinand Northern Railway (Kaiser Ferdinands-Nordbahn) acquired the locomotives Minotaurus and Ajax from the British manufacturer Jones, Turner and Evans in 1841, to work the line between Vienna and Stockerau. The locomotive Ajax has been preserved at the Technisches Museum Wien since 1992 and is described as "the oldest preserved steam locomotive on the European continent.".[3]


Finnish Class B1 locomotive of 1868 at the Finnish Railway Museum

In Finland the 0-4-2 was represented by the Classes B1 and B2.

The Finnish Steam Locomotive Class B1 is an 0-4-2ST locomotive, built by Beyer, Peacock and Company at their Gorton Foundry works in Manchester, England.


B25-02 Steam Locomotive at Ambarawa Railway Museum

In 1905 the Nederlands Indische Spoorweg opened a line between Yogyakarta and Ambarawa via Magelang, a hilly region requiring a rack railway because of the 6.5% gradients. The 0-4-2T wood burning B25 class were made for this line in 1902 by Maschinenfabrik Esslingen, Germany. They were four cylinder compound locomotives with two of the cylinders working the pinion wheels.

There are two examples of B25 class locomotive still in operation, namely B25-02 and B25-03. Both were based in Ambarawa, where they have served for more than a hundred years. Locomotive B25-01 may also still be found at the entrance to the Ambarawa Railway Museum.

On the island of Sumatra, there are some larger cousins of this class being used for hauling coal trains, namely the D18 and E10 classes.

New Zealand

An 0-4-2T Peckett and Sons locomotive with a train on the Goldfields Railway in Waikino, New Zealand.

The 0-4-2T arrangement was used by two classes of locomotives operated by the New Zealand Railways Department. The first was the C class of 1873, originally built as an 0-4-0T. The class was found to be unstable at speeds higher than 15 mph, so by 1880 all members of the class had been converted to 0-4-2T to rectify this problem.

The second and more notable 0-4-2T class, and the only one actually built as 0-4-2T, was the unique H class designed to operate the Rimutaka Incline on the Wairarapa Line. The Incline's steep gradient necessitated the use of the Fell mountain railway system, and the six members of the H class spent their entire lives operating trains on the Incline. Except for a few brief experiments with other classes, the H class had exclusive use of the Incline from their introduction in 1875 until the Incline's closure in 1955. The class leader, H 199, is preserved on static display at the Fell Engine Museum in Featherston and is the only extant Fell locomotive in the world.

The 0-4-2T arrangement was also employed for steam locomotives operated by small private industrial railways and bush and mineral tramways. One such locomotive, built by Peckett and Sons in 1938, is currently operational on the Goldfields Railway that runs between Waihi and Waikino along a stretch of the former route of the East Coast Main Trunk Railway in the Bay of Plenty.

North America

Although the type was not used by any major railroads in North America, H. K. Porter, Inc and the Baldwin Locomotive Works produced many small tank locomotives of this type for industrial and plantation work. The 0-4-2T Olomana built by Baldwin in 1883 is a famous example of such types.[4]

South Africa

Standard gauge

"Blackie" plinthed at Cape Town station

In September 1859 Messrs. E. & J. Pickering, contractors to the Cape Town Railway and Dock Company for the construction of the Cape Town-Wellington railway line, imported a small 0-4-0 side-tank steam locomotive from England for use during the construction of the railway. This was the first locomotive in South Africa. In 1874 the locomotive was rebuilt to a 0-4-2T configuration before it was shipped to Port Alfred, where it served as construction locomotive on the banks of the Kowie river and was nicknamed ”Blackie”. It has been declared a heritage object and was plinthed in the main concourse of Cape Town station.[5][6]

In 1860 the Cape Town Railway and Dock Company took delivery of eight standard gauge tender locomotives with a 0-4-2 wheel arrangement for service on the Cape Town-Wellington line, which was still under construction. They remained in service on this line while it was being converted to dual standard-and-Cape gauges from around 1872 and were only retired in 1881, when sufficient Cape gauge locomotives were in service.[5]

Cape gauge

Two 3 ft 6 in (1,067 mm) tank engine classes of this wheel arrangement were supplied to the Nederlandsche-Zuid-Afrikaansche Spoorweg-Maatschappij (NZASM) by Maschinenfabrik Esslingen and Breda, Nederland between 1890 and 1894.[7]

NZASM 19 Tonner no. 17

The earlier class of twenty-four 19 Tonner locomotives, built by Maschinenfabrik Esslingen and Machinefabriek Breda v/h Backer & Rueb, were delivered between 1890 and 1892. Between 1906 and 1909, while in Central South African Railways (CSAR) service, ten of them were converted to rail motor engines for use on suburban services. This entailed being semi-permanently coupled to a passenger coach that contained a driving cab at the rear, with the controls arranged so that the push-pull unit could be driven from either vehicle. In 1912 these locomotives were taken onto the South African Railways (SAR) roster as obsolete unclassified locomotives.[7][8]

The latter class of four 32 Tonner rack locomotives, built by Esslingen in 1894 and 1897, was equipped with pinions for use on the rack railway section between Waterval Onder and Waterval Boven in the eastern Transvaal. They survived through the Imperial Military Railways (IMR) and CSAR eras and, although the rack section was removed in 1908, they were still in service in 1912 when they were taken onto the SAR roster as obsolete unclassified locomotives.[7][8]

Narrow gauges

SAR Class NG2 saddle tank locomotive

Between 1897 and 1901 several 0-4-2ST saddle tank steam locomotives, built for 600 mm (1 ft 11 58 in) narrow gauge by Dickson Manufacturing Company of Scranton in Pennsylvania, were delivered to various gold mines on the Witwatersrand by Arthur Koppel, acting as importing agents. In 1915, when an urgent need arose for additional locomotives in Deutsch-Südwest-Afrika (now Namibia) during World War I, two of these locomotives were purchased second-hand by the SAR for use on the narrow gauge lines in that territory. The two locomotives remained in South West Africa after the war.[9][10]

When a system of grouping narrow gauge locomotives into classes was introduced on the SAR somewhere between 1928 and 1930, these two locomotives were classified as Class NG2.[11]

Pioneer derailed outside O'okiep after a Boer commando attack on the town

The Namaqua Copper Company's first 2 ft 6 in (762 mm) gauge locomotive, acquired in 1901, was a Dick, Kerr-built 0-4-2ST named Pioneer which was rebuilt from the 0-4-0ST configuration, possibly due to the additional weight of fuel tanks that were installed under the cab when it was converted to use fuel oil. The company also operated four more 0-4-2 tank locomotives, one 9 Ton and three 12 Ton, possibly also acquired from Dick, Kerr.[12]:35–39

In 1904 a single 2 ft 6 in (762 mm) gauge 0-4-2 inverted saddle-tank locomotive named Caledonia was placed in service by the Cape Copper Company as a shunting engine at O'okiep in the Cape Colony.[12]:25–27, 40

In 1905 the Cape Copper Company also placed a single 0-4-2 tank locomotive named Britannia in service as a shunting engine at Port Nolloth in the Cape Colony.[12]:25–28

United Kingdom

1400 class No. 4866 at Didcot

From the mid-1860s onwards the 0-4-2 wheel arrangement tended only to be used on tank engines in the United Kingdom. Exceptions were in Scotland on the Caledonian and Glasgow and South Western railways and in southern England on the London Brighton and South Coast Railway (LB&SCR) and the London and South Western Railway. The LB&SCR uniquely built express passenger 0-4-2 tender classes until 1891.

Stroudley's D-tank

From 1868 the Great Western Railway built a number of GWR 1400 Class was built between 1932 and 1936, designed for push-pull autotrains. These were the last UK examples of this wheel arrangement. Four of them have been preserved.

William Stroudley of the LB&SCR built four very successful 0-4-2 classes, three tenders and one tank, between 1873 and 1891. The first of these was his powerful D-tank for suburban passenger work. One hundred and twenty five of these had been built by 1887, some of which survived in service until 1951. However, the most famous class were his Gladstone class express passenger locomotives, the first of which has been preserved.

See also


  1. ^ Science Museum, The British Railway Locomotive 1803-1853, H.M.S.O., 1958. p.13.
  2. ^ Tufnell, Robert (1986). The Illustrated Encyclopedia of Railway Locomotives. Chartwell Books, Inc.  
  3. ^ Steam locomotive "Ajax" – Technical Museum Vienna
  4. ^
  5. ^ a b :11–15, 18, 23
  6. ^ Blackie, Article by D. Littley, SA Rail September–October 1989, Published by RSSA, p. 133.
  7. ^ a b c Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 20–25, 98–101, 110.  
  8. ^ a b Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912, p. 2 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  9. ^ Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 100–101.  
  10. ^ Information supplied by John N. Middleton
  11. ^ South African Railways and Harbours Narrow Gauge Locomotive Diagram Book, 2’0" Gauge, S.A.R. Mechanical Dept. Drawing Office, Pretoria, 28 November 1932
  12. ^ a b c Bagshawe, Peter (2012). Locomotives of the Namaqualand Railway and Copper Mines (1st ed.). Stenvalls.  
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.