In mathematics, separation of variables (also known as the Fourier method) is any of several methods for solving ordinary and partial differential equations, in which algebra allows one to rewrite an equation so that each of two variables occurs on a different side of the equation.
Contents

Ordinary differential equations (ODE) 1

Alternative notation 1.1

Example 1.2

Partial differential equations 2

Homogeneous case 2.1

Nonhomogeneous case 2.2

Matrices 3

References 4

External links 5
Ordinary differential equations (ODE)
Suppose a differential equation can be written in the form

\frac{d}{dx} f(x) = g(x)h(f(x))
which we can write more simply by letting y = f(x):

\frac{dy}{dx}=g(x)h(y).
As long as h(y) ≠ 0, we can rearrange terms to obtain:

{dy \over h(y)} = {g(x)dx},
so that the two variables x and y have been separated. dx (and dy) can be viewed, at a simple level, as just a convenient notation, which provides a handy mnemonic aid for assisting with manipulations. A formal definition of dx as a differential (infinitesimal) is somewhat advanced.
Alternative notation
Some who dislike Leibniz's notation may prefer to write this as

\frac{1}{h(y)} \frac{dy}{dx} = g(x),
but that fails to make it quite as obvious why this is called "separation of variables". Integrating both sides of the equation with respect to x, we have

\int \frac{1}{h(y)} \frac{dy}{dx} \, dx = \int g(x) \, dx, \qquad\qquad (1)
or equivalently,

\int \frac{1}{h(y)} \, dy = \int g(x) \, dx
because of the substitution rule for integrals.
If one can evaluate the two integrals, one can find a solution to the differential equation. Observe that this process effectively allows us to treat the derivative \frac{dy}{dx} as a fraction which can be separated. This allows us to solve separable differential equations more conveniently, as demonstrated in the example below.
(Note that we do not need to use two constants of integration, in equation (1) as in

\int \frac{1}{h(y)} \, dy + C_1 = \int g(x) \, dx + C_2,
because a single constant C = C_2  C_1 is equivalent.)
Example
Population growth is often modeled by the differential equation

\frac{dP}{dt}=kP\left(1\frac{P}{K}\right)
where P is the population with respect to time t, k is the rate of growth, and K is the carrying capacity of the environment.
Separation of variables may be used to solve this differential equation.

\frac{dP}{dt}=kP\left(1\frac{P}{K}\right)

\int\frac{dP}{P\left(1\frac{P}{K}\right)}=\int k\,dt
To evaluate the integral on the left side, we simplify the fraction

\frac{1}{P\left(1\frac{P}{K}\right)}=\frac{K}{P\left(KP\right)}
and then, we decompose the fraction into partial fractions

\frac{K}{P\left(KP\right)}=\frac{1}{P}+\frac{1}{KP}
Thus we have

\int\left(\frac{1}{P}+\frac{1}{KP}\right)\,dP=\int k\,dt

\ln\begin{vmatrix}P\end{vmatrix}\ln\begin{vmatrix}KP\end{vmatrix}=kt+C

\ln\begin{vmatrix}KP\end{vmatrix}\ln\begin{vmatrix}P\end{vmatrix}=ktC

\ln\begin{vmatrix}\cfrac{KP}{P}\end{vmatrix}=ktC

\begin{vmatrix}\cfrac{KP}{P}\end{vmatrix}=e^{ktC}

\begin{vmatrix}\cfrac{KP}{P}\end{vmatrix}=e^{C}e^{kt}

\frac{KP}{P}=\pm e^{C}e^{kt}

Let A=\pm e^{C}.

\frac{KP}{P}=Ae^{kt}

\frac{K}{P}1=Ae^{kt}

\frac{K}{P}=1+Ae^{kt}

\frac{P}{K}=\frac{1}{1+Ae^{kt}}

P=\frac{K}{1+Ae^{kt}}
Therefore, the solution to the logistic equation is

P\left(t\right)=\frac{K}{1+Ae^{kt}}
To find A, let t=0 and P\left(0\right)=P_0. Then we have

P_0=\frac{K}{1+Ae^0}
Noting that e^0=1, and solving for A we get

A=\frac{KP_0}{P_0}
Partial differential equations
The method of separation of variables is also used to solve a wide range of linear partial differential equations with boundary and initial conditions, such as heat equation, wave equation, Laplace equation and Helmholtz equation.
Homogeneous case
Consider the onedimensional heat equation.The equation is

\frac{\partial u}{\partial t}\alpha\frac{\partial^{2}u}{\partial x^{2}}=0


(1)

The boundary condition is homogeneous, that is

u\big_{x=0}=u\big_{x=L}=0


(2)

Let us attempt to find a solution which is not identically zero satisfying the boundary conditions but with the following property: u is a product in which the dependence of u on x, t is separated, that is:

Substituting u back into equation (1) and using the product rule,

\frac{T'(t)}{\alpha T(t)} = \frac{X''(x)}{X(x)}.


(4)

Since the right hand side depends only on x and the left hand side only on t, both sides are equal to some constant value − λ. Thus:

T'(t) =  \lambda \alpha T(t),


(5)

and

X''(x) =  \lambda X(x).


(6)

− λ here is the eigenvalue for both differential operators, and T(t) and X(x) are corresponding eigenfunctions.
We will now show that solutions for X(x) for values of λ ≤ 0 cannot occur:
Suppose that λ < 0. Then there exist real numbers B, C such that

X(x) = B e^{\sqrt{\lambda} \, x} + C e^{\sqrt{\lambda} \, x}.
From (2) we get

and therefore B = 0 = C which implies u is identically 0.
Suppose that λ = 0. Then there exist real numbers B, C such that

X(x) = Bx + C.
From (7) we conclude in the same manner as in 1 that u is identically 0.
Therefore, it must be the case that λ > 0. Then there exist real numbers A, B, C such that

T(t) = A e^{\lambda \alpha t},
and

X(x) = B \sin(\sqrt{\lambda} \, x) + C \cos(\sqrt{\lambda} \, x).
From (7) we get C = 0 and that for some positive integer n,

\sqrt{\lambda} = n \frac{\pi}{L}.
This solves the heat equation in the special case that the dependence of u has the special form of (3).
In general, the sum of solutions to (1) which satisfy the boundary conditions (2) also satisfies (1) and (3). Hence a complete solution can be given as

u(x,t) = \sum_{n = 1}^{\infty} D_n \sin \frac{n\pi x}{L} \exp\left(\frac{n^2 \pi^2 \alpha t}{L^2}\right),
where D_{n} are coefficients determined by initial condition.
Given the initial condition

u\big_{t=0}=f(x),
we can get

f(x) = \sum_{n = 1}^{\infty} D_n \sin \frac{n\pi x}{L}.
This is the sine series expansion of f(x). Multiplying both sides with \sin \frac{n\pi x}{L} and integrating over [0,L] result in

D_n = \frac{2}{L} \int_0^L f(x) \sin \frac{n\pi x}{L} \, dx.
This method requires that the eigenfunctions of x, here \left\{\sin \frac{n\pi x}{L}\right\}_{n=1}^{\infty}, are orthogonal and complete. In general this is guaranteed by SturmLiouville theory.
Nonhomogeneous case
Suppose the equation is nonhomogeneous,

\frac{\partial u}{\partial t}\alpha\frac{\partial^{2}u}{\partial x^{2}}=h(x,t)


(8)

with the boundary condition the same as (2).
Expand h(x,t), u(x,t) and f(x,t) into

h(x,t)=\sum_{n=1}^{\infty}h_{n}(t)\sin\frac{n\pi x}{L},


(9)


u(x,t)=\sum_{n=1}^{\infty}u_{n}(t)\sin\frac{n\pi x}{L},


(10)


f(x)=\sum_{n=1}^{\infty}b_{n}\sin\frac{n\pi x}{L},


(11)

where h_{n}(t) and b_{n} can be calculated by integration, while u_{n}(t) is to be determined.
Substitute (9) and (10) back to (8) and considering the orthogonality of sine functions we get

u'_{n}(t)+\alpha\frac{n^{2}\pi^{2}}{L^{2}}u_{n}(t)=h_{n}(t),
which are a sequence of linear differential equations that can be readily solved with, for instance, Laplace transform, or Integrating factor. Finally, we can get

u_{n}(t)=e^{\alpha\frac{n^{2}\pi^{2}}{L^{2}} t} \left (b_{n}+\int_{0}^{t}h_{n}(s)e^{\alpha\frac{n^{2}\pi^{2}}{L^{2}} s} \, ds \right).
If the boundary condition is nonhomogeneous, then the expansion of (9) and (10) is no longer valid. One has to find a function v that satisfies the boundary condition only, and subtract it from u. The function uv then satisfies homogeneous boundary condition, and can be solved with the above method.
In orthogonal curvilinear coordinates, separation of variables can still be used, but in some details different from that in Cartesian coordinates. For instance, regularity or periodic condition may determine the eigenvalues in place of boundary conditions. See spherical harmonics for example.
Matrices
The matrix form of the separation of variables is the Kronecker sum.
As an example we consider the 2D discrete Laplacian on a regular grid:

L = \mathbf{D_{xx}}\oplus\mathbf{D_{yy}}=\mathbf{D_{xx}}\otimes\mathbf{I}+\mathbf{I}\otimes\mathbf{D_{yy}}, \,
where \mathbf{D_{xx}} and \mathbf{D_{yy}} are 1D discrete Laplacians in the x and ydirections, correspondingly, and \mathbf{I} are the identities of appropriate sizes. See the main article Kronecker sum of discrete Laplacians for details.
References

Polyanin, Andrei D. (20011128). Handbook of Linear Partial Differential Equations for Engineers and Scientists. Boca Raton, FL:

MyintU, Tyn; Debnath, Lokenath (2007). Linear Partial Differential Equations for Scientists and Engineers. Boston, MA:

External links

Hazewinkel, Michiel, ed. (2001), "Fourier method",

John Renze, Eric W. Weisstein, Separation of variables (Differential Equation) at MathWorld

Methods of Generalized and Functional Separation of Variables at EqWorld: The World of Mathematical Equations

Examples of separating variables to solve PDEs

"A Short Justification of Separation of Variables"
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.