World Library  
Flag as Inappropriate
Email this Article

Kuhn slide

Article Id: WHEBN0019361052
Reproduction Date:

Title: Kuhn slide  
Author: World Heritage Encyclopedia
Language: English
Subject: Carrying wheel, DRG Class 24, Equalising beam, Articulated bogie, Baguley valve gear
Collection: Locomotive Parts, Steam Locomotive Technologies
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Kuhn slide

Classic Walschaerts valve gear with lifting link
4. Lifting link 5. Lifting arm 7. Expansion link 8. Radius rod
Kuhn slide on a Deutsche Reichsbahn DR Class 65.10 Neubaulok

The Kuhn slide (German: Kuhnsche Schleife) is part of a modified Walschaerts (German:Heusinger) valve gear on steam locomotives[1] and is named after its inventor, Michael Kuhn (1851-1903). The term is also used to refer to this particular type of Walschaerts valve gear system as a whole.

Contents

  • Overview 1
  • Advantages 2
  • Variations 3
  • References 4

Overview

Problems often arise in incorporating a Walschaerts valve gear into the design of tank and narrow gauge locomotives because of space limitations. The reversing rod (with its lifting arm), needed to change between forward and reverse running, is therefore mounted at the same level as the pivot of the expansion link. This enables the lifting link (German: Hängeeisen) to be dispensed with, and the lifting arm to be connected directly to the radius rod. To ensure the required horizontal movement, the back end of the radius rod is designed as a slide (the 'Kuhn slide') which fits into a rotatable crosshead (Gleitstein) in the lifting arm.

Advantages

The Kuhn valve gear was not as widespread as the classic Walschaerts valve gear as its production costs were higher. One advantage of the Kuhn slide is that it runs equally smoothly in either direction. For that reason it was preferred on tank locomotives which, for operational reasons, often had to run backwards for long periods.

Variations

A variation of the Kuhn slide was developed by the Winterthur Locomotive Works. On the so-called Winterthur valve gear the expansion link itself is attached to the reversing shaft, both having a common pivot.

References

  1. ^ Weisbrod, M. and Barkhoff, R. (1994). Die Dampflokomotive - Technik und Funktion. Teil 2: Dampfmaschine, Fahrgestell und Triebwerk, 3rd ed., Hermann Merker Verlag, Fürstenfeldbrück, pp. 56-7. ISBN 3-922404-04-9.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.