World Library  
Flag as Inappropriate
Email this Article

Cessna XMC

Article Id: WHEBN0021020070
Reproduction Date:

Title: Cessna XMC  
Author: World Heritage Encyclopedia
Language: English
Subject: List of Cessna models, Cessna Model A, Cessna EC-1, Cessna EC-2, Cessna CG-2
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Cessna XMC

Model 1014 & 1034
Role Technology demonstrator
National origin USA
Manufacturer Cessna
First flight 22 January 1971
Status Development cancelled in 1972
Number built One

The Cessna XMC was a prototype technology demonstrator designed to show advanced aerodynamics and materials.[1][2]

The marketing name of XMC stood for "Experimental Magic Carpet" and the single test aircraft was designated Cessna 1014 and later 1034.[1]

Development

The two seat Cessna XMC was built to test several concepts in light aircraft design including a ducted propeller and swept cantilever wing. The program ran from the beginning of 1971 until the end of 1972. The aircraft was used to assess improved visibility, center of gravity effects, control surface locations and response, cabin noise levels and also the relationship of wing versus engine and propeller.[1][2]

The sole prototype was registered as N7174C and given Cessna serial number 674. It was powered by a Continental O-200 100 hp (75 kW) engine mounted in pusher configuration. This was the same powerplant used in the then-current production Cessna 150. The tail boom was similar in design to that used on the Cessna Skymaster.[1][2]

The first flight of the 1014 model was made on 22 January 1971 by Cessna test pilot Bruce Barrett. The aircraft was modified in 1972 and given a new model number, 1034. In this configuration it was flown first 1 June 1972, again with Bruce Barrett at the controls.[2]

Test program

The test program consisted of three phases:

Phase I - Model 1014 - January 1971
ground handling, flying characteristics and visibility testing[2]
Phase II - Model 1014 - May 1971
Exploring methods of reducing weight and production costs for single and twin-engine Cessnas[2]
Phase III - Model 1034 - June 1972
Use of shrouded propeller to test improvements in propeller efficiency and reduction of noise[2]

Test results

The XMC project ended in 1972. The aircraft configuration proved to have higher cabin noise levels than the production Cessna 150 and offered no performance advantages over the older design.[2]

Variants

Model 1014 XMC
The single aircraft in its initial configuration with unducted pusher propeller and fully faired nose wheel[1]
Model 1034 XMC
The same aircraft was modified in 1972 with a shrouded propeller, standard nose gear fairing plus increased vertical stabilizer area and new wing tips.[1][2]

Specifications (Cessna XMC prototype)

Data from The Cessnas that got away[1] & Cessna XMC[2]

General characteristics
  • Crew: 1
  • Capacity: 1 Flight test observer
  • Length: 23 ft 0 in (7.01 m)
  • Wingspan: 32 ft 0 in (9.75 m)
  • Powerplant: 1 × Continental O-200 4-cyl. horizontally opposed air-cooled piston engine, 100 hp (75 kW)

Performance

References

  1. ^ a b c d e f g Murphy, Daryl (2006). "The Cessnas that got away". Retrieved 2008-12-22. 
  2. ^ a b c d e f g h i j Visschedijk, Johan, Walter van Tilborg and Karl Smithl (December 2003). "Cessna XMC". Retrieved 2008-01-09. 

External links

  • Cessna 1014 XMC photo
  • Cessna 1034 XMC photo
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.