World Library  
Flag as Inappropriate
Email this Article

Volkswagen D24 engine

Article Id: WHEBN0013810183
Reproduction Date:

Title: Volkswagen D24 engine  
Author: World Heritage Encyclopedia
Language: English
Subject: Volvo 200 Series, Volkswagen LT, Volvo 700 Series, List of Volvo engines, D24
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Volkswagen D24 engine

Volkswagen D24
Overview
Manufacturer Volkswagen Group
Production 1978–1995
Combustion chamber
Configuration inline/row 6-cylinder (R6/I6) diesel engine
Displacement 2,383 cc (145.4 cu in)
Cylinder bore 75.5 mm (2.97 in)[1]
Piston stroke 86.4 mm (3.40 in)
Cylinder block alloy grey cast iron, 7 main bearings[1]
Cylinder head alloy cast aluminium alloy[1]
Valvetrain 12v, belt-driven single overhead camshaft (SOHC)[1]
Compression ratio 23.0:1
Combustion
Fuel system Bosch mechanical distributor injection pump, indirect fuel injection[1]
Fuel type diesel
Oil system wet sump[1]
Cooling system water-cooled[1]
Chronology
Successor Volkswagen D24T engine

The Volkswagen D24 engine is a 2.4-litre inline-six-cylinder (R6/I6), naturally aspirated diesel engine, formerly manufactured by Volkswagen Group from 1978 to 1995.[1]

Subsequent forced induction variants of this engine were also available as the Volkswagen D24T engine with a turbocharger, and a turbo intercooled version, the Volkswagen D24TIC engine. These turbocharged variants resulted in higher power and torque outputs.[1]

Technical description

All variants (naturally aspirated and forced induction) displace 2,383 cubic centimetres (145.4 cu in) from a cylinder bore of 76.48 millimetres (3.01 in), and a piston stroke of 86.4 millimetres (3.40 in). Its inline six cylinder block is constructed from grey cast iron, and has seven main bearings to support the die-forged steel crossplane crankshaft. The cast aluminium alloy cylinder head contains two valves per cylinder each with two concentric valve springs, and shim-adjustable bucket tappets. The valves are opened via a timing belt-driven single overhead camshaft (SOHC), and the combustion chamber compression ratio is 23.5:1.

Attached to the cylinder head is a cast aluminium alloy intake manifold on one side, and two cast iron exhaust manifolds on the same side (it's a non cross flow engine) (one manifold for three cylinders) followed by a two in one exhaust pipe system. The fuel system uses a Bosch mechanical distributor-type( bosch VE type) injection pump which feeds indirect fuel injection into a remote whirl pre-combustion chamber.

The initially available variant of the D24 produced a DIN-rated motive power output of 55 kilowatts (75 PS; 74 bhp) at 4,500 revolutions per minute (rpm); and it generated a torque turning force of 155 newton metres (114 lbf·ft) at 2,800 rpm.[1] Subsequent minor evolutions and revisions resulted in differing power and torque ratings.

D24 models
ID(s) DIN-rated max. motive power
at rpm
max. torque
at rpm
redline
(rpm)
years
1S, ACT[1] 51 kW (69 PS; 68 bhp) @ ?,??? 1988–1995
CP, DW[1] 55 kW (75 PS; 74 bhp) @ 4,000 155 N·m (114 lbf·ft) @ 2,800 1978–1992
Volvo D24t 95 kW (129 PS; 127 bhp) @ 4,700 275 N·m (203 lbf·ft) @ 2,550 max rpm @5200 rpm before fuel cut

The weight of this engine is 182 kg or 401 lbs.

Applications

The D24 was fitted in the Volkswagen LT range from Volkswagen Commercial Vehicles, with factory production from August 1978 to December 1995.[1] Specific dates of the variants - CP: 08/78-11/82, DW: 12/82-07/92, 1S: 08/88-07/92, ACT: 08/92-12/95.[1]

The D24 was also found in a number of Volvo Cars - specifically the 240, 740, and 940 and was coupled to Volvo ZF, AW, M45, M46 (overdrive) or M47 and m47 II transmissions.

The D24 also found use in military vehicle applications. It was used in the early variants of the Steyr-Daimler-Puch Pinzgauer High Mobility All-Terrain Vehicle, with current Pinzgauers being manufactured with the turbocharged variant - the D24T.

Operational experience

In service, the unit proved to be a somewhat mixed bag; some owners reported excellent reliability and long engine lives, others complained of overheating, frequent blowing of head gaskets, cylinder head cracks (cracks between the valve seals are common and do not represent danger if the cracks do not exceed specifications, premature wear of the bottom and top end bearings, low oil pressure etc.

A poorly maintained cooling system could also lead to overheating and, especially with the higher stressed turbo engines, head gasket problems. The head gasket problem has been treated with the adoption of a multi-layer steel head gasket which replaces the fiber one.

The camshaft drive belt also required changing at the recommended intervals, which was a pretty involved job, not least because of poor access in the under-floor engined LT vans, and the necessity of special (and expensive) locking tools to carry out the replacement, which have always been scarce and are becoming increasingly difficult to obtain.[2]

The top end also featured adjustable tappets using the bucket and shim arrangement, and required checking every 25,000 miles (40,000 km), although later (1990–) models had self-adjusting hydraulic tappets.

In many cases however, engines that have been looked after properly and treated with mechanical sympathy (this engine is particularly sensitive to being thrashed from cold, it is important to go gently until warmed up, and to avoid short journeys which will exacerbate rapid engine wear) have been known to clock up 500 000 - 600 000 miles

See also

References

http://www.volvoclub.org.uk/press/pdf/240DieselPressRelease1978.pdf

External links

  • Volkswagen Group corporate website
    • Chemnitz (Germany) - engine plant Mobility and Sustainability
    • Kassel (Germany) - engine plant Mobility and Sustainability
    • Salzgitter (Germany) - engine plant Mobility and Sustainability
    • Polkowice (Poland) - engine plant Mobility and Sustainability
    • São Carlos (Brazil) - engine plant Mobility and Sustainability
    • Shanghai (China) - engine plant Mobility and Sustainability
  • http://www.volvoclub.org.uk/press/pdf/240DieselPressRelease1978.pdf

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.